Portable Forced AIR Heater, Safety Information

200,000 Btu/Hr

PORTABLE FORCED AIR HEATER

SAFETY INFORMATION

WARNINGS

IMPORTANT: Read this Owner’s Manual carefully and completely before trying to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from burns, ﬁre, explosion, electrical shock, and carbon monoxide poisoning.

DANGER: Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning re- semble the ﬂu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include preg- nant women, persons with heart or lung disease or anemia, those under the inﬂuence of alcohol, and those at high altitudes.

Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

•Use only kerosene or No. 1 fuel oil to avoid risk of ﬁre or explosion. Never use gasoline, naphtha, paint thinners, alco- hol, or other highly ﬂammable fuels.

•Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable federal, state, and lo- cal regulations regarding the safe fu-

eling of heating units.

b)Only the type of fuel specified on the heater's data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel- line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day's supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters, torches, welding equipment, and

similar sources of ignition (exception: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor pen- etrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the federal, state, or local author- ity having jurisdiction.

•Never use heater where gasoline, paint thinner, or other highly ﬂammable va- pors are present.

•Follow all local ordinances and codes when using heater.

•Heaters used in the vicinity of tarpau- lins, canvas, or similar enclosure mate- rials shall be located a safe distance from such materials. The recommended mini- mum safe distance is 10 feet. It is fur- ther recommended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be se- curely fastened to prevent them from igniting or from upsetting the heater due to wind action.

•Use only in well-vented areas. Before using heater, provide at least a three- square-foot opening of fresh, outside air for each 100,000 Btu/Hr of rating. This heater produces carbon monoxide, which is listed by the State of Califor- nia as a reproductive toxin under Propo- sition 65.

•Use only in places free of ﬂammable vapors or high dust content.

•Use only the electrical voltage and fre- quency speciﬁed on model plate.

•Use only a three-prong, grounded ex- tension cord.

•Minimum heater clearances from com- bustibles:

Outlet: 8 Ft.	Sides:	4 Ft.
Top: 4 Ft.	Rear:	4 Ft.

•Locate heater on a stable and level sur- face if heater is hot or running or a ﬁre may occur.

•When moving or storing heater, keep heater in a level position or fuel spill- age may occur.

•Keep children and animals away from heater.

•Unplug heater when not in use.

•When used with thermostat, heater may start anytime.

•Never use heater in living or sleeping areas.

•Never block air inlet (rear) or air outlet (front) of heater.

•Never move, handle, refuel, or service a hot, operating, or plugged-in heater.

•Never attach duct work to front or rear of heater.

•Warning to New York City Residents For Use Only At Construction Sites in accordance with applicable NYC codes under NYCFD certificate of approval #4803, #4899, #4908, #4909, or #4934.

102569

REM200, B200, R200 specifications

Desa B200, REM200, and R200 are innovative models from a prominent manufacturer, showcasing advanced technologies and features designed to meet the needs of modern consumers. These models excel in combining performance, efficiency, and user-friendliness.

The Desa B200 is primarily known for its efficiency and high output functionality. Equipped with a robust engine and cutting-edge fuel technology, this model significantly reduces emissions while maintaining high performance levels. The B200 features an intuitive control interface that allows users to easily manage settings, ensuring optimal performance in a wide range of conditions. This product is ideal for residential and light commercial applications, showcasing versatility that caters to diverse user requirements.

On the other hand, the REM200 stands out with its state-of-the-art remote connectivity features. Users can control and monitor the REM200 from their smartphones through a dedicated application, making it convenient for tech-savvy individuals. The integration of IoT (Internet of Things) technology ensures that users receive real-time updates on performance metrics, enhancing operational efficiency. In addition to its connectivity, the REM200 is equipped with safety features that automatically shut down the unit in case of anomalies, protecting users and ensuring longevity of the device.

The R200 model is designed with a focus on portability and user convenience. Weighing less than conventional models in its category, the R200 offers easy mobility without compromising on performance. Its compact design makes it an excellent choice for outdoor enthusiasts, camping trips, or emergency power supply needs. Additionally, the R200 features a durable build that withstands harsh conditions, ensuring reliability in various environments.

All three models integrate advanced energy efficiency technologies to minimize power consumption, making them eco-friendly choices in today's environmentally conscious market. Their design reflects practical ergonomics, allowing for easy operation and maintenance. Combined, the B200, REM200, and R200 create a product line that not only addresses power generation needs but also aligns with sustainable practices.

In conclusion, the Desa B200, REM200, and R200 each offer unique features catered to different user needs. Together, they represent a commitment to innovation in design and technology, setting a benchmark in the power generation industry. Whether users prioritize efficiency, remote connectivity, or portability, these models cover a comprehensive range of applications, making them desirable options in their respective categories.