Desa 10BY150ECB owner manual Fuel Filter, Spark Plug, Nozzle

Page 8

MODEL BY150ECB 150,000 Btu/Hr

PORTABLE FORCED AIR HEATER

FUEL FILTER

1.Remove side cover screws using 5/16" nut-driver.

2.Remove side cover.

3.Pull upper fuel line off fuel filter neck.

4.Carefully pry bushing, fuel filter, and lower fuel line out of fuel tank.

5.Wash fuel filter with clean fuel and replace in tank.

6.Attach upper fuel line to fuel filter neck.

7.Replace side cover.

Fuel Filter,

Bushing, and

Lower Fuel

Line

Upper

Fuel

Line

Side

Cover

Figure 10 - Fuel Filter Removal

SPARK PLUG

1.

Remove upper shell (see page 7).

2.

Remove fan (see page 7).

3.

Remove spark plug wire from spark

 

plug.

4.

Remove spark plug and wave spring

Burner

Wave Spring Washer

Head

Spark Plug Wire

Spark

Plug

Figure 11 - Spark Plug Removal

Bend

Here to

Adjust

Gap

.110” Gap (2.8 mm)

Figure 12 - Spark Plug Gap

Side Electrode

270° Acceptable Range for Side Electrode

Figure 13 - Acceptable Range For Side Electrode

NOZZLE

1.

Remove upper shell (see page 7).

2.

Remove fan (see page 7).

3.

Remove fuel and air line hoses from

 

burner head.

4.

Remove spark plug wire from spark

9.Blow compressed air through face of nozzle. This will free any dirt in nozzle area.

10.Inspect nozzle seal for damage.

11.Replace nozzle into burner head and tighten firmly (9.1-12.4 n-m /80-110 inch-pounds).

12.Attach burner head to combustion chamber.

13.Install spark plug and wave spring washer in burner head. Torque 40 to 60 inch-pounds. Adjust (if necessary) to bring side electrode into the acceptable range (see figure 14).

14.Attach spark plug wire to spark plug.

15.Attach fuel and airline hoses to burner head.

16.Replace fan (see page 7).

17.Replace fan guard and upper shell.

Wave

CombustionSpring

ChamberBurner Washer

Head

Spark Plug

Wire

Screw

Spark

Plug

 

Fuel Line

Hose

Air Line

Hose

Figure 14 - Removing Burner Head

Nozzle

 

washer from burner head using 13/16"

 

open-end wrench.

5.

Clean and regap spark plug electrodes

 

to .110" (2.8 mm) gap.

6.

Install spark plug and wave spring

 

washer in burner head. Torque 40 to

 

60 inch-pounds. Adjust (if necessary)

 

plug.

5.

Remove spark plug and wave spring

 

washer from burner head using 13/

 

16" open-end wrench.

6.

Remove three screws using 5/16" nut-

 

driver and remove burner head from

 

combustion chamber.

Face

Nozzle

Nozzle Seal

 

to bring side electrode into the accept-

 

able range (see figure 13).

7.

Attach spark plug wire to spark plug.

8.

Replace fan (see page 7).

9.

Replace fan guard and upper shell.

7.

Place burner head into vise and lightly

 

tighten.

8.

Carefully remove nozzle from burner

 

head using 5/8" socket wrench (see

 

Figure 15).

Burner

 

 

Head

Air

Fuel

 

 

Line

 

Line

 

Fitting

 

Fitting

 

 

Figure 15 - Removing Nozzle

8

104001

Image 8
Contents Portable Forced AIR Heater Safety Information UnpackingAssembly Product IdentificationTo Start Heater Theory OperationFuels Ventilation Operation Preventative Maintenance Schedule Storing TRANSPORTING, or ShippingTo Stop Heater To Restart HeaterTroubleshooting Observed Fault Possible Cause RemedyService Procedures Pump Pressure AdjustmentUpper Shell Removal FANNozzle Fuel FilterSpark Plug Pump Rotor SpecificationsReplacement Parts and Accessory Wiring Diagram RFIWheels and Handle Parts List KEY Part Number Description QTYBurner Head Assembly Illustrated Parts BreakdownParts List KEY Part Number Description QTYEC Conformity Declaration EC Conformity Declaration SGB Youngman104001 Warranty and Repair Service

10BY150ECB specifications

Desa 10BY150ECB is a notable addition to the lineup of modern compact biogas plants designed to efficiently convert organic waste into renewable energy. This system is particularly tailored for small to medium-scale operations, making it ideal for agricultural farms, food processing industries, and community waste management. The key features of the Desa 10BY150ECB focus on its efficiency, user-friendly design, and technological advancements.

One of the standout features of the Desa 10BY150ECB is its robust anaerobic digestion process. It utilizes advanced microbial technology to break down organic materials in an oxygen-free environment. This process not only minimizes greenhouse gas emissions but also maximizes biogas production, generating a substantial yield of methane, which can be harnessed for electricity generation, heating, or even as a vehicle fuel.

The design of the 10BY150ECB emphasizes compactness and ease of installation. Its modular setup allows for quick deployment and scalability, meaning that operators can expand their systems based on growing waste inputs and energy needs. The plant operates efficiently even with variable feedstock types, which is a common challenge in biogas production. With an input capacity of 150 cubic meters per day, it can handle varying types of organic waste including agricultural residues, food scraps, and municipal solid waste.

Technologically, the Desa 10BY150ECB is equipped with state-of-the-art control systems that ensure optimal operating conditions. This includes real-time monitoring of parameters such as temperature, pH, and methane concentration. The system's automation capabilities reduce the need for manual intervention, thereby minimizing operational costs and improving reliability.

Additionally, safety features such as pressure relief valves and gas monitoring sensors are integrated into the system to prevent leaks and ensure safe operation. The compact design also includes built-in storage for digestate, the nutrient-rich byproduct of the digestion process, which can be used as a natural fertilizer, enhancing sustainability efforts.

In terms of overall characteristics, the Desa 10BY150ECB not only addresses energy generation but also promotes waste reduction and circular economy principles. It contributes positively to local environmental initiatives by reducing landfill dependency and fostering energy independence for communities and businesses alike. Overall, the Desa 10BY150ECB stands out as an innovative solution for sustainable energy production, combining efficiency, technology, and practicality in biogas management.