LTD HEATER INSTALLATION
Note: The optimum distance the heater should stand away from the fan inlet has been experimently de- termined. If there are any ignition problems, or flame quality is not as desired, move heater in or out, cali- brating heater to actual field condi- tions. Variation from table may be required to adjust for grain depth, fan performance and bin size.
8.The LTD stand off bracket can increase the efficiency of the fan and heater dramatically com- pared to using an upwind mounting plate. Moreover, by applying the heat to the air up- wind, the air will be a constant temperature discharging into the plenum resulting in more uniform drying.
9.After heater is securely mounted, connect gas lines as required per the installation re- quirements.
10