Installing into the countertop
Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of the appliance.
Pay special attention to the minimum space and clearance requirements. Secure the brackets at both sides with the provided screws before mounting the hob onto the brackets.
Min. 50 mm |
Min. 5 mm |
560 mm
| ø 6 |
x 4 | 90° |
|
560±1
R3
min. 20
490±1 600 
50
Induction Hob |
20 mm |
Insulation Panel |
Oven |
min. 5 mm
ventilation gap
14_ installing the hob