Samsung VR20J9010UG/SP manual ENGLISH-06

Page 6

Safety information

WARNING Power related

ffPlease prevent any risk of electric shock or fire.

––Do not damage the power cord.

––Do not pull the power cord too hard or touch the power plug with wet hands.

––Do not use a power source other than 100-

240 V~ and also do not use a multi outlet to supply power to number of devices at the same time. (Do not leave the cord carelessly on the floor.)

––Do not use a damaged power plug, power cord or loose power outlet.

ffClean dust or any foreign matters on the pin and contact part of the power plug.

–– There is a risk of electric shock or malfunction.

WARNING Before use

ffDo not use POWERbot near combustible materials.

––Place near candle, desktop lamps, fireplace or near combustible materials such as gasoline, alcohol, thinners etc.

ffThe POWERbot is intended for household use therefore do not use it in an attic, basement, storage, industrial building, out of indoor space, places with moisture (such as bathroom, laundry), on the table or shelves.

––The POWERbot can be damaged or malfunction.

ffBe sure POWERbot does not pass through or touch any kind of liquids.

––The POWERbot can be severely damaged and it may contaminate other areas if the wheels pass through liquid.

ffDo not spill any liquids on the docking station.

–– There is a risk of fire or electric shock.

ffDo not use the docking station for anything other than its intended purpose.

––There is a risk of fire or severe damage to the docking station.

ffAlways keep the cliff sensor clean for your safety.

WARNING In use

ffIf any abnormal sounds, smells or smoke come from POWERbot, immediately shut off the emergency switch at the bottom of POWERbot and contact a service center.

WARNING Cleaning and maintenance

ffWhen power cord is damaged, contact a service center to get it replaced by a certified repairman.

–– There is a risk of fire or electric shock.

ffPlease check with a Samsung Electronics service center when exchanging batteries.

––Using batteries from other products can cause malfunction.

ENGLISH-06

Image 6
Contents POWERbot Charging Safety information InformationIndicates a detachable supply unit General ENGLISH-05 ENGLISH-06 ENGLISH-07 Installation Accessories 1Turn on the emergency switch on the bottom ChargingCheck the installation status of the docking station when Manually charge the POWERbot whenSR20J90U Series Using POWERbotPress Button for more than Seconds SR20K9000U SeriesAuto clean Spot clean SR20J90U Series Manual cleanUsing the remote control Power/RechargingBottom Name of each partTop Display panelCleaning and maintaining Cleaning the dustbinCleaning the sensors and the camera Remove the Power Clean the Power brush Brush cover Cleaning the Power brushCleaning the Driving wheel Reassemble the Power Brush Brush coverCharging Use Cleaning and maintenance About the batteryInformation codes Troubleshooting Symptom ChecklistOpen Source Announcement Specifications Detail informationThis product is RoHS compliant