Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the | button for more than | WARNING |
3 seconds |
|
|
•When POWERbot is not used for 30 minutes, power will turn off automatically.
Starting Auto clean mode
Press and release this button.
<SR20J90✴✴U Series>
The POWERbot moves and cleans automatically until it cleans an entire space once.
<SR20K9000U✴ Series>
The POWERbot moves and cleans all set places until the battery is depleted.
✻✻Stop cleaning: Press and release the 
button
Starting Spot clean mode
Press and release this button. The POWERbot cleans a localized area intensely.
Recharging
You can command POWERbot to recharge at the docking station automatically while it is cleaning by pressing this button.