Samsung VCR8950L3B/SML manual Maintain tools and fi lters, Cleaning the Vacuum Cleaning Robot

maintain tools and fi lters

CLEANING THE VACUUM CLEANING ROBOT

Please keep the cleaning and maintenance methods in mind

■When the Power Switch is damaged, please contact the service

agent so that it does not cause any accidents.

■ Do not use any means or mechanical devices not installed by the manufacturer that could accelerate the deformation of the vacuum cleaning robot.

■ Always turn off the power switch at the bottom of the main unit before cleaning the vacuum cleaning robot. The vacuum cleaning robot could operate suddenly and cause an injury.

Cleaning the Sensor Window and the Camera

You must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot.

■ Never spray water, thinner, benzene etc. directly onto the main unit of vacuum cleaning robot.

■ Lightly wipe the sensor window or camera using a soft cloth.

04 MAINTAIN

Camera

Front Sensor window

Front Sensor Window and

Camera

Cliff Sensor Window

Rear Sensor Window

maintain _37