Eco Drum Clean auto alarm function
After a wash, if it is detected that cleaning the drum is required, the “Eco Drum Clean ” indicator on the display and the corresponding lamp on the Cycle Selector light up. In this case, remove the laundry
from the washing machine, turn the power on, and clean the drum by performing the Eco Drum Clean cycle.
If you do not perform the Eco Drum Clean cycle, the Eco Drum Clean indicator on the display and the corresponding lamp on the Cycle Selector are turned off. They will be turned on again after two washes are performed. Note that this does not indicate that there is a problem with the washing machine.
Although the Eco Drum Clean auto alarm function usually operates once a month, the frequency may differ depending on how often the washing machine is used.
If the alarm occurs, clean the debris filter as well (refer to the “Cleaning the debris filter“ section on page 34). Failure to do so may decrease the performance of the Eco Bubble function.
Draining the washing machine in an emergency
1.Unplug the washing machine from the electrical outlet.
2.Open the filter cover (A)by using a coin or key.
A
3.Prepare a bowl.
The remaining water may be more than you expected. Use a large bowl.
4. Pull out the emergency drain tube (C) and put the end of the emergency drain tube (C) into a bowl.
Cleaning your washing machine
5.Hold the emergency drain cap (B) at the end of the emergency drain tube (C) and slowly pull it out.
6.Allow all the water to flow into a bowl.
7.Reinsert the emergency drain cap and the emergency drain tube.
8.Close the filter cover.
B
C
33
Untitled-1 33
3:09:53