Philips SWW1800/27 quick start Switch on the transmitter, Select the source on the transmitter

Choose a spot near the TV.

Switch on the transmitter

Press on the remote control or transmitter in standby mode to turn it on.

Select the source on the transmitter

Press the source buttons: 1 HDMI , 2 HDMI, 3 INPUT, 4 INPUT on the remote control or transmitter until you see the available video from your device.

Note

•In standby mode, a red power LED displays on the transmitter .

• Depending on equipment and the input selected, between input selection/start-up and being able to see the image on your TV can take up to 15 seconds.

Wallmount the receiver

You can either place the receiver near the HDTV or mount it on the wall.

1

2 Drill two holes in the wall. Ensure the distance between the two holes is 4.5mm.

3 Punch the supplied plastic wall anchors into the two holes on the wall.

4 Put the two screws into the plastic wall anchors and leave 3.2mm to mount the receiver on.

5 Hook the receiver on the wall.