Motorola SG4-DRT-2X manual Key Feature

Page 3

STARLINE3

Table 1 identifies and provides information on the user-interface features of the SG4-DRT-2X:

Key

1

2

3

4

5

6

7

8

Feature

0.5 V/mW

ENABLE/FAULT

Description

This test point enables monitoring of the optical output level of the module. The nominal scale factor is 0.5 V/mW. Note that the optical power test point does not track changes in optical power due to the laser tracking error.

A red LED (FAULT) indicates that the laser output power is below normal limits. Because the laser output requires a short period of time to stabilize, it is normal for the LED not to illuminate for approximately 10 seconds. Note that the module must be enabled for the fault indicator to function.

A green LED (ENABLE) provides visual indication of the transmitter’s enable status.

CH A RF input test point (−5 dBmV nominal total power)

CH A JXP attenuator location. Used to adjust −5 dBmV nominal total power reading at CH A test point.

This MCX connector provides the SG4-DRT-2X with CH A RF input through a cable connection from the configuration board in an SG4000.

Optical bulkhead with SC/APC type connector that provides output from the SG4-DRT-2X

This MCX connector provides the SG4-DRT-2X with CH B RF input through a cable connection from the configuration board in an SG4000.

CH B JXP attenuator location. Used to adjust −5 dBmV nominal total power reading at CH B test point.

9

CH B RF input test point (−5 dBmV nominal total power)

SG4-DRT-2X Installation Sheet

Page 2 Page 4
Image 3
Page 2 Page 4
Contents SG4-DRT-2X Installation Sheet SG4-DRT-2X block diagramSG4-DRT-2X transmitter User featuresKey Feature SG4000 lid with two analog transmitters Installing the SG4-DRT-2X in the SG4000 NodeSG4-DRT-2X installed in SG4000 Illustrates a properly installed and cabled SG4-DRT-2XSplit Return Split return configuration2X redundant return board- signal flow 2X redundant return configuration board8STARLINE Split Redundant Return Split redundant return configuration2X redundant return board 2X redundant return signal flowSTARLINE11 Segmented Return Segmented return configurationSegmented return board Segmented return board signal flowSG4-DRT-2X Installation Sheet Specifications SG4-DRT-2X Models ƒ Motorola Online http//businessonline.motorola.com If You Need HelpSpecial Symbols That Might Appear on the Equipment

SG4-DRT-2X specifications

The Motorola SG4-DRT-2X is a robust communication device that stands out for its versatility in various industrial and commercial applications. Designed primarily for mission-critical environments, this device incorporates cutting-edge technologies to enhance operation efficiency and user experience.

A key feature of the SG4-DRT-2X is its superior audio performance. It utilizes advanced noise-cancellation technologies that ensure crystal-clear communication even in the loudest environments. This is essential for industries like construction, manufacturing, and emergency services, where clear communication can be a matter of safety. The device also supports wideband audio, which enables higher audio quality for better voice clarity.

Another prominent characteristic is its rugged design, making it suitable for harsh conditions. The SG4-DRT-2X complies with military standards, offering water and dust resistance. It can withstand drops and impacts, providing reliable performance in challenging settings. The ergonomic housing ensures comfort during prolonged usage, which is an important consideration for professionals in the field.

Connectivity is another area where the Motorola SG4-DRT-2X excels. It integrates seamlessly with existing communication systems while supporting multiple channels for group communication. This is facilitated by advanced digital technologies that allow for secure and encrypted transmissions, ensuring that critical information remains confidential and protected against eavesdropping.

The device is also equipped with a long-lasting battery that supports extended use without the need for frequent recharging. Its smart power management system optimizes energy consumption, allowing users to focus on their tasks without the constant worry of running out of power.

Moreover, the SG4-DRT-2X features a customizable interface, enabling users to tailor settings according to their specific needs. The intuitive controls make it user-friendly, allowing even those with minimal technical knowledge to operate the device effectively.

In summary, the Motorola SG4-DRT-2X is a high-performance communication device characterized by its superior audio quality, rugged design, robust connectivity, and user-centric features. It is engineered to support professionals across various sectors, enhancing both communication and productivity. As industries continue to evolve, devices like the SG4-DRT-2X will play an integral role in ensuring efficient and secure communication in demanding environments.
Top Page Image Contents