Motorola SG4-DRT-2X manual STARLINE11

Page 11

STARLINE11

The RF cable should be approximately eight inches long and have red boots on the connector signifying the return path.

8If necessary, connect the appropriate return RF cables from the SG4-RF modules to each 2X redundant return board.

9Ensure that the PIC cable is properly connected to the lid and power distribution board in the housing base.

10Route and connect the fiber service cable.

11Apply power to the node. Allow five to ten seconds for the system self-diagnosis to complete.

12Verify that the green LED (ENABLE), located on the top panel of each SG4-DRT-2X is illuminated to confirm enable status.

11Measure the RF power at each channels test point on the top of each SG4-DRT-2X.

The test point is a −20 dB test point located after the JXP pad location and indicates the level into the SG4-DRT-2X.

12Place the proper JXP pad into each SG4-DRT-2X pad facility to achieve the nominal total power level at the test point of −5 dBmV.

13Review return path system levels.

The SG4-DRT-2X is configured to drive the laser to the recommended level (+15 dBmV)

when the total combined power at the housing ports connected to the 2X redundant return board is approximately +28 dBmV.

14Measure the optical power level at the dc test point using a multimeter. The scaled voltage at this test point is 0.5V/mW.

SG4-DRT-2X Installation Sheet

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SG4-DRT-2X Installation Sheet SG4-DRT-2X block diagramSG4-DRT-2X transmitter User featuresKey Feature SG4000 lid with two analog transmitters Installing the SG4-DRT-2X in the SG4000 NodeSG4-DRT-2X installed in SG4000 Illustrates a properly installed and cabled SG4-DRT-2XSplit Return Split return configuration2X redundant return board- signal flow 2X redundant return configuration board8STARLINE Split Redundant Return Split redundant return configuration2X redundant return board 2X redundant return signal flowSTARLINE11 Segmented Return Segmented return configurationSegmented return board Segmented return board signal flowSG4-DRT-2X Installation Sheet Specifications SG4-DRT-2X Models ƒ Motorola Online http//businessonline.motorola.com If You Need HelpSpecial Symbols That Might Appear on the Equipment

SG4-DRT-2X specifications

The Motorola SG4-DRT-2X is a robust communication device that stands out for its versatility in various industrial and commercial applications. Designed primarily for mission-critical environments, this device incorporates cutting-edge technologies to enhance operation efficiency and user experience.

A key feature of the SG4-DRT-2X is its superior audio performance. It utilizes advanced noise-cancellation technologies that ensure crystal-clear communication even in the loudest environments. This is essential for industries like construction, manufacturing, and emergency services, where clear communication can be a matter of safety. The device also supports wideband audio, which enables higher audio quality for better voice clarity.

Another prominent characteristic is its rugged design, making it suitable for harsh conditions. The SG4-DRT-2X complies with military standards, offering water and dust resistance. It can withstand drops and impacts, providing reliable performance in challenging settings. The ergonomic housing ensures comfort during prolonged usage, which is an important consideration for professionals in the field.

Connectivity is another area where the Motorola SG4-DRT-2X excels. It integrates seamlessly with existing communication systems while supporting multiple channels for group communication. This is facilitated by advanced digital technologies that allow for secure and encrypted transmissions, ensuring that critical information remains confidential and protected against eavesdropping.

The device is also equipped with a long-lasting battery that supports extended use without the need for frequent recharging. Its smart power management system optimizes energy consumption, allowing users to focus on their tasks without the constant worry of running out of power.

Moreover, the SG4-DRT-2X features a customizable interface, enabling users to tailor settings according to their specific needs. The intuitive controls make it user-friendly, allowing even those with minimal technical knowledge to operate the device effectively.

In summary, the Motorola SG4-DRT-2X is a high-performance communication device characterized by its superior audio quality, rugged design, robust connectivity, and user-centric features. It is engineered to support professionals across various sectors, enhancing both communication and productivity. As industries continue to evolve, devices like the SG4-DRT-2X will play an integral role in ensuring efficient and secure communication in demanding environments.
Top Page Image Contents