Getting Started
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Control Panel
SOURCE
E
MENU
y
z
P(Power) Power Indicator Remote control sensor
Standby mode
Toggles between all the available input sources. In the
Displays an
Adjusts the volume. In the OSD, use the y buttons as you would use the land rbuttons on the remote control.
Changes the channels. In the OSD, use the zbuttons as you would use the dand ubuttons on the remote control.
Turns the LED display on or off.
Blinks and turns off when the power is on and lights up in standby mode.
Aim the remote control towards this spot on the LED display.
Do not leave your LED display in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.