Basic Features
System Menu
¦Setting the Time
MENUm→ System → ENTERE
Time
■Clock: Setting the clock is for using various timer features of the LED display.
✎The current time will appear every time you press the INFO button.
✎If you disconnect the power cord, you have to set the clock again.
Clock Mode (Auto / Manual)
xAuto: Set the current time automatically using the time from a digital channel.
✎The antenna must be connected in order to set the time automatically.
xManual: Set the current time manually.
✎Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
✎Available only when Clock Mode is set to Manual.
✎You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control.
Using the Sleep Timer
■Sleep Timer t: Automatically shuts off the LED display after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
✎ To cancel Sleep Timer, select Off.
Setting the On / Off Timer
■On Timer
On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock fi rst.
On Timer 1
Setup |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Off | |||
|
|
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sun | Mon | Tue | Wed | Thu | Fri | Sat | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Time |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0:00 | ||||
Volume |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 20 | ||||
Source |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TV | ||
Aerial |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DTV | ||
Channel |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | ||||
|
|
|
|
|
|
|
|
| Close |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| R Return | ||
•The displayed image may differ depending on the model.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer.
✎The c mark indicates the day you've selected. Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select a desired input source when the LED display is turned on automatically (USB can be selected only when a USB device is connected to the LED display) Aerial (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo fi les to be played when the LED display is turned on automatically.