Dolby Digital Out
-PCM : Converts to PCM(2CH) audio.
-Bit stream : Outputs Dolby Digital via digital output. Select Bit stream when connecting to a
Dolby Digital Decoder.
MPEG2 Digital Output
-PCM : Converts to PCM (2CH) audio.
-Bit stream : Converts to
Note
-When playing discs that have MPEG Audio in
bit stream selection, the coaxial may not have any audio output. This depends on the AV receiver.
Dynamic Compression
-On : To select dynamic compression. This is useful for watching movies late at night, as it balances the loud and quiet portions of a disc.
-Off : To select the standard range.
PCM Down Sampling
-On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
-Off : Select this when the Amplifier is connected to the player if it is 96KHz compatible. In this case, all signals will be output without any changes.
Power On Music
This menu is used to activate or deactivate the opening sound when you turn on the DVD player.
-On : To turn On Start up music.
-Off : To turn Off Start up music.
Note
-Even when PCM Down sampling is Off.
-Some discs will only output down sampled audio through the digital outputs.
-To make the setup menu disappear, press the MENU button.
HDMI
-If your TV is not compatible with compressed multi channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.
-If your TV is not compatible with LPCM sampling rates over 48k Hz, you should set PCM Down sampling to on.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Setting Up the display options
Display options enable you to set various video functions of the player.
1. Press the MENU button.
2. Press the buttons to select Display Setup Page, then press the † or ENTER button.
3. Press the buttons to select the desired item, then press the ® or ENTER button.
–To make the setup menu disappear, press the MENU but ton.
TV Aspect | 4:3 LB |
Screen Message | On |
Video Output | |
Black Level | Off |
TV System | PAL |
DivX VOD |
|
|
|
TV Aspect
Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).
-4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.
TV Aspect | 4:3 LB 4:3 Pan&Scan | ||
Screen Message | On | 4:3 Letter Box | |
16:9 Wide | |||
Video Output | |||
Black Level | Off |
| |
TV System | PAL |
| |
DivX VOD |
|
| |
|
|
| |
Screen Message
Use to turn on-screen messages On or Off.
● CHANGING SETUP MENU