Samsung DVD-H1080/MEA manual Reference, Firmware upgrade, Introduction, Upgrade procedure

reference

Firmware upgrade

Introduction

Samsung will often support the software upgrade to improve the performance of this unit to the latest status, through Samsung Internet Site (www.samsung.com).

Because the specially new mpeg4 codec continues and it is appearing. What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings :

1.You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com).

2.Write the file to Disc using CD-RW of your computer.

Upgrade file detected

Curent version: 07.01.03.08.H1080XSS

Update version: 07.02.03.09.H1080XSS

Upgrade ?

Press Play to start

Upgrade

Firmware upgrade

menu starts

-During the firmware upgrade process, the tray will open. Please remove the disc and wait for about 2 minutes.

-If the DVD player was successfully updated, the disc tray will close and the unit will turn off and on.When the unit turns on, the Select Menu Language screen will appear.

3. Press the  buttons to select the desired language, and then press the ENTER button.

Select Menu Language

English

ΔϴΒήϋ

● REFERENCE

Note

-File system CD-ROM

-Character set ISO 9660

-Finalized, single session

-Write speed low

Upgrade procedure

1.Open the disc tray of your DVD-Player.

Place the burned disc on the tray. Close the tray. The Firmware upgrade screen will appear.

Upgrade file detected

Curent version: 07.01.03.08.H1080XSS

Update version: 07.02.03.09.H1080XSS

Upgrade ?

Press Play to start

Firmware upgrade

menu appears

2.Press enter or play upgrade

-Press any other button on the remote control to cancel the upgrade and eject the dics (eg. etc).appear.

Upgrade file detected

Curent version: 07.01.03.08.H1080XSS

Update version: 07.02.03.09.H1080XSS

Upgrade ?

Press Play to start

File copying

Firmware upgrade

starts

Note

-If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service.

-Do not press any button or unplug the power cord during the upgrade.

-The upgrade procedure may change, refer to the web site (www.samsung.com).

English _35