Quadra-Fire 1900 owner manual Door Handle Assembly, Glass Replacement, With Ceramic

Page 8

The chimney must have a fire clay flue liner (or equivalent) with a minimum thickness of 5/8” (16mm) and must be installed with refractory mortar. There must be at least ½” (13mm) air space between the flue liner and the chimney wall (Figure 4). An equivalent liner must be a listed chimney liner system or other approved material.

DOOR HANDLE ASSEMBLY

FIGURE 4

NOTE:

Spring handle not included in door handle assembly. When replacing door handle, either use old spring handle or order new spring handle separately.

LATCH CAM

A chimney inside the house must have at least 2” (50mm) of clearance to the combustible structure. A chimney outside the house must have at least 1” (25mm) clearance to the combustible structure. Firestops must be installed in the spaces where the chimney passes through floors and/or ceiling (Figure 5).

FIGURE 5

GLASS REPLACEMENT

 

REPLACE ONLY

 

DOOR CROSS SECTION

WITH CERAMIC

 

GLASS

 

 

FIBERGLASS

TAPE

GLASS

GLASS FRAME

DOOR GASKET ROPE

GLASS TAB SCREW

1.Remove door from stove and lay on a padded flat surface.

2.Remove glass frame and screws with a Phillips screwdriver (turn screws counterclockwise).

3.Lift glass frame pieces and glass out of the door frame.

4.Lay new glass with fiberglass tape around it into the door frame, making sure the Quadra-Fire logo reads correctly to the outside.

5.Place glass frame pieces over the fiberglass tape on the edges of the glass. Be sure glass is centered in the opening (i.e., same space top and bottom, left and right sides).

6.Reinstall screws tight enough to hold glass and frame in place. DO NOT OVERTIGHTEN.

7.Check again for centering of glass in door frame, and give all screws a final tightening.

Page 8

Page 21

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Important Safety Notes North America’s BestTable of Contents Accessories and Service Parts AccessoriesDimensions TOP Heat Shield InstallationPedestal Model LEG ModelInstallation of Optional Blower Blower Switch AdjustmentsSteps for Adjusting the Blower Speed Control Clearances to Combustibles UL and ULCSafety Listing Installation Materials Needed for Your SafetyBrick Pattern Venting SystemBaffle Removal and Replacement Chimney ConnectorBlankets are in each individual baffle before reinstalling Chimney HEIGHT/DRAFTWith Ceramic Door Handle AssemblyGlass Replacement Maintenance Building a Fire Wood Selection and StorageBurning Guidelines Blower Operating InstructionsOperating Tips Important Please Read Before Using Stove Burning Process Operating InstructionsPEDESTAL/LEG KIT Installation Connection to a Metal Prefabricated ChimneyMobile Home Installation Outside AIR KIT InstallationLEG Models Pedestal Models

1900 specifications

The Quadra-Fire 1900 is a premier wood-burning stove that combines traditional craftsmanship with modern technology, delivering an exceptional heating experience for homes. Known for its efficiency and elegant design, the Quadra-Fire 1900 has become a popular choice among homeowners looking to enhance their living spaces with a reliable and effective heating solution.

One of the standout features of the Quadra-Fire 1900 is its remarkable efficiency. With a heating capacity of up to 2,400 square feet, it is ideal for larger spaces, ensuring that warmth is evenly distributed throughout the room. The stove utilizes advanced combustion technology to maximize heat output while minimizing emissions, meeting stringent environmental standards and ensuring a cleaner burn.

The Quadra-Fire 1900 is equipped with a unique four-point burn system that enhances combustion performance. This system works by introducing air at multiple entry points, allowing for a more thorough burn of the wood fuel. This results in higher efficiency and less creosote buildup in the chimney, which means less maintenance for homeowners. Additionally, the stove features an adjustable damper that allows users to control the airflow and temperature, tailoring the heat output to their specific needs.

Another highlight of the Quadra-Fire 1900 is its impressive build quality. Constructed from high-quality materials, the stove embodies durability and reliability. The firebox is designed to withstand high temperatures and is lined with firebrick, which aids in heat retention and contributes to the overall efficiency of the unit. The sleek, modern design of the stove makes it an attractive focal point in any room, available in a range of finishes to complement various home decors.

For ease of use, the Quadra-Fire 1900 is designed with a large, easy-to-load door that provides ample access for refueling. The large viewing window features a clean burn technology that allows users to enjoy the aesthetic appeal of the flames while ensuring optimal performance and cleanliness.

In terms of safety, the Quadra-Fire 1900 includes several features that ensure peace of mind. An integrated blower option can be added for enhanced heat circulation, ensuring that warmth reaches every corner of the room. The stove also meets all EPA guidelines, promoting not only efficiency but also safety.

Altogether, the Quadra-Fire 1900 is a powerful, efficient, and beautifully designed wood-burning stove, making it an ideal heating solution for discerning homeowners looking to combine functionality with style. With its advanced technologies and user-friendly features, it remains a top choice in the world of wood stoves.
Top Page Image Contents