Connecting the Video Out to your TV
Choose one of the two methods for connecting to a TV.
|
|
| METHOD 1 |
|
|
|
|
|
| Green |
|
VIDEO OUT |
| Blue |
|
|
| Red FM ANT | METHOD 2 |
AUX IN | COMPONENT |
| (supplied) |
| OUT |
|
|
|
|
|
|
|
|
|
|
02 Connections
METHOD 1 : Component (Progressive Scan) Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the COMPONENT OUT (PR, PB and Y) jacks on the back of the product to the Component Video Input jacks on your TV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
✎NOTE
When the Progressive scan mode is selected, the VIDEO output does not feed any signals.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video output mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for more information on how to select the TV's Video Input source.
!CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.