Samsung HT-E320/SQ manual Advanced Functions, Playing Media Files using the USB Host Feature

Page 28

Advanced Functions

USB Function

 

USB Recording

Playing Media Files using the USB Host Feature

You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video by connecting the storage device to the USB port of the product.

5V 500mA

1.Connect the USB device to the USB port on the front panel of the product.

2.Press the FUNCTION button to select USB.

USB appears on the display screen and then disappears.

3.Press the ◄► buttons to select Videos, Photos or Music.

-Select a file to play.

Safe USB Removal

To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.

Press the YELLOW(C) button.

- REMOVE will appear on the display.

Remove the USB cable.

NOTE

Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the USB port.

While playing CD-DA (Compact Disc Digital Audio) using the USB Recording function or listening to the FM radio or receiving audio source from an external device, you can record the audio source in the USB memory. Ex) USB recording of CD-DA audio contents

1.Connect the USB device to your product.

2.Insert the CD-DA disc into the CD tray.

3.Press the USB REC button on the remote control.

To start recording the current track,

press the USB REC button on the remote control while the system is playing a track or stopped temporarily.

To record the entire CD, press and hold the USB REC button on the remote control.

- "FULL RECORDING" appears on the display and recording starts.

4. Press the STOP () button to stop recording.

When USB recording of a CD is completed, you will find a new folder named “RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.

When USB recording of FM radio or AUX source is completed, you will find a new folder named “TUNER RECORDING or AUX RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.

NOTE

Do not disconnect the USB connection or the power cable during the USB Recording. Otherwise, it may cause damage to the data.

To stop USB Recording, press the STOP button and disconnect the USB device after the system stops playing the CD completely.

If you disconnect the USB connection during the USB Recording, the system will turn off and you will not be able to delete the recorded file.

If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.

If the recording duration is less than 5 seconds, a recording file may not be created.

USB Recording works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.)

The audio signal will not be output during USB recording of the CD.

When Speaker selection is set to TV Speaker, the USB Recording function is not supported.

28 English

Image 28
Contents Digital Home Entertainment System Safety Information Safety WarningsEnglish Wide SLOT, Fully InsertAccessories PrecautionsCheck for the supplied accessories below Holding discs Disc StorageHandling and Storing Discs LicenceContents Advanced Functions Disc Types and Characteristics Getting StartedRegion Code Icons that will be used in manualDo not use the following type of discs Disc types that can be playedDisc Types And Disc Format DVD±R/±RW, CD-R/RW Discs Supported Formats DivXFormat V1/V2/V3/V7Front Panel DescriptionRear Panel AUX in JacksVideo OUT Jack FM Antenna JackInstalling batteries in the Remote Control Tour of the Remote ControlRemote control Connecting the Speakers ConnectionsConnecting the wall mount Connecting The SpeakersSpeaker Components SubwooferConnecting the Video Out to your TV Choose one of the two methods for connecting to a TVMethod 1 Component Progressive Scan Video Method 2 Composite VideoConnecting the FM Antenna Press Stop buttonAUX Connecting an External Analog Component Connecting Audio from External ComponentsAnalog signal components such as a VCR VCRSetup Before Starting Initial SettingsSetting the Setup menu Press the Exit button to exit the setup menuVideo Out Signaloption Initial SettingsTV Aspect User EQBasic Functions TV Screen Saver/Power Saving FunctionProduct Information Audio CDCD-DA/MP3/WMA Playback Rotate FunctionJpeg File Playback Using the Disc Menu Forward/Reverse SearchSkipping Scenes/Songs Slow Motion PlayRepeat Playback Using the Title MenuDVD/DivX Repeat Displaying Disc Information Selecting the Audio LanguageSelecting the Subtitle Language Tools menuSound Mode Angle FunctionCaption Function Press the S.VOL buttonDSP Digital Signal Processor/EQ Sound Virtual SoundPops Equser UserSetting Mono/Stereo Presetting StationsUsing buttons on the Remote Control Listening to RadioPlaying Media Files using the USB Host Feature Advanced FunctionsUSB Function USB Recording Safe USB RemovalTroubleshooting Other InformationLanguage code list Check/RemedyFront speaker output 35W x 23Ω Subwoofer output 80W3Ω Specifications86dB/W/M 88dB/W/M OpenSSL License OpenSSL License ` CIS AH68-02468D
Related manuals
Manual 35 pages 44.69 Kb