TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet? | ¼¼Connect the power plug to the outlet. |
|
|
A function does not work when the button is pressed.
• Is there static electricity in the air? | ¼¼Disconnect the power plug and connect it again. | |
|
|
|
|
|
|
Sound is not produced. |
|
|
• Is the Mute function on? | ¼ | (Mute) button to cancel the function. |
• Is the volume set to minimum? | ¼Press the | |
¼ |
| |
| ¼Adjust the Volume. | |
|
|
|
The remote control does not work. |
|
|
• Are the batteries drained? | ¼¼Replace with new batteries. | |
• Is the distance between the remote control and main | ¼¼Move closer to the unit. | |
unit too far? |
|
|
The TV SoundConnect (TV pairing) failed.
ENG
•Does your TV support TV SoundConnect?
•Is your TV firmware the latest version?
•Does an error occur when connecting?
•Reset the TV mode and connect again.
¼¼TV SoundConnect is supported by some Samsung TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect.
¼¼Update your TV with the latest firmware. ¼¼Contact the Samsung call centre.
¼¼Press and hold the p button for 5 seconds to reset the TV SoundConnect connection.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• | Your subwoofer may not be connected to the | ¼¼Try to connect your subwoofer again. |
| main body of the product. | (See Page 17) |
|
| |
The subwoofer drones and vibrates noticeably. |
| |
• | Try to adjust the vibration of your subwoofer. | ¼¼Press the WOOFER button on your remote control to |
|
| adjust its value (between |
31