To connect the Soundbar to a Bluetooth device

Once you have turned off the Soundbar and the pairing is disconnected, the pairing will not be restored automatically. To reconnect, you must pair the device again.

The Soundbar may not run the Bluetooth Search or Connection functions properly in the following cases: --If there is a strong electrical field around the Soundbar.

--If several Bluetooth devices are simultaneously paired with the Soundbar. --If the Bluetooth device is turned off, not in place, or malfunctions.

--Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.

Once paired the device,on ARC/DIN/USB/HDMI/AUX mode,select "[Samsung] Soundbar" from the list will automatically change to BT mode.

functions

To connect the Soundbar to a Bluetooth device

Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.

Connect

Bluetooth device

1. Press the SOURCE button on the remote control of the Soundbar to display the BT message.

•You will see BT READY on the front display of the Soundbar.

2. On the Bluetooth device you want to connect, open the Bluetooth menu. (Refer to the Bluetooth device's user manual.)

3. Select the Stereo headset menu on the Bluetooth device.

•You will see a list of scanned devices.

4. Select "[Samsung] Soundbar" from the list.

•When the Soundbar is connected to the Bluetooth device, it will display Device name ➡ BT on the front display.

•If the Bluetooth device has failed to pair with the Soundbar, delete the previous “[Samsung] Soundbar” found by the Bluetooth device and have it search for the Soundbar again.

•If the Soundbar is in another mode (except TV mode), you can shift it to Bluetooth mode using your smart device. 5. Play music on the connected device.

•You can listen to the music playing on the connected Bluetooth device over the Wireless Audio - Soundbar system.

•In BT mode, Repeat functions are not available. For some Bluetooth device, Play/Stop/Next/Prev function are not available.

▪▪ You may be required to enter a PIN code (password) when connecting the Bluetooth device to the Soundbar. If the PIN code input window appears, enter <0000>.

▪▪ The Soundbar supports SBC data (44.1kHz, 48kHz). ▪▪ The AVRCP feature is supported.

▪▪ Connect only to a Bluetooth device that supports the A2DP (AV) function.

▪▪ You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function. ▪▪ Only one Bluetooth device can be paired at a time.

▪▪