Samsung HW-H550/SQ, HW-H551/SQ Using the Auto Power Link function, Using the Audio Sync function

POWER

AUTO

SOURCE POWER SPEAKER TV SOURCE

SoundConnect

TV VOL	TV CH	AUDIO SYNC
TV MUTE	TV INFO TV PRE-CH TV EXIT

LEVEL MUTE LEVEL

VOL

Surr.SoundTONE

AUTO	SPEAKER TV SOURCE
SOURCE POWER

SoundConnect

REPEAT

Using the AUTO POWER LINK function

If you connect the main unit to a TV with a digital optical cable, set the Auto Power function ON to have the Soundbar turn on automatically when you turn

the TV on.

Press the AUTO POWER button on the Soundbar remote to turn the AUTO POWER function on and off.

•The Auto power function turns on and off each time you press AUTO

POWER.

AUTO POWER LINK	Display
ON	POWER LINK ON
OFF	POWER LINK OFF

▪▪ This function is available only when Anynet+ (HDMI-CEC) is turned off.

Using the AUDIO SYNC function

Video may appear out of synch with the audio if the Soundbar is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

Press AUDIO SYNC +/–. on the remote control of this unit.

•You can use the + , - buttons to set the audio delay time between 0 ms and 300 ms.

▪▪ In USB mode, TV mode, or BT mode, the Audio Sync function may not work.

Using the TONE function

Press TONE on the Soundbar remote.

•Each time the button is pressed, the selection changes as follows : TREBLE ➡ BASS.Press the VOL + or VOL - button to increase or decrease the Treble or Bass volume. You can set the Tone setting for each from -3 to +3.

SPEAKER button

If the TV and Soundbar are connected via HDMI, this button lets you select between listening to audio through your TV or through the

Soundbar.

Press SPEAKER on the remote control of this unit.

AUDIO MODE	SPEAKER	Scroll Display	Display
HDMI IN	TV	TV SPEAKER	TV SPK
	Soundbar	AVR SPEAKER	HDMI
ARC	TV	TV SPEAKER	S MUTE
	Soundbar	AVR SPEAKER	TV ARC

ENG

● FUNCTIONS

21