Samsung WW90J6410CW/LP, WW90J6410CX1LP manual Operations, Control panel

01 Cycle Selector

Turn the dial to select a cycle.

02 Display

The display shows current cycle information and estimated time

remaining, or an information code when a problem occurs.

03 Temp.

Press to change the water temperature for the current cycle.

04 Rinse

Press to change the rinse count for the current cycle. You can set

the rinse count to a max of 5.

Press to change the spinning speed for the current cycle.

•

Rinse Hold : The final rinse process is suspended so that the

05 Spin

laundry remains in the water. To unload the laundry, run a drain

or spin process.

•

No Spin : The drum does not spin after the final drain process.

06 Options

Press to select an option from Intensive, Pre Wash, Bubble Soak

and Quick Wash 15’/30’. Press again to deselect.

07 Bubble Soak

Press to activate/deactivate the Bubble Soak function. This function

helps remove a wide variety of stubborn stains.

Delay End lets you set the end time of the current cycle. Based

on your settings, the start time of the cycle will be determined

08 Delay End

by the machine’s internal logic. For example, this setting is useful

for programming your machine to finish a wash at the time you

normally return home from work.

• Press to choose a preset unit of hours.

09 Quick Wash

For lightly soiled garments of less than 2 kg that you want to wash

15’/30’

quickly.

10 Power

Press to turn on/off the washing machine.

11 Start/Pause

Press to start or stop operation.