Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the 
automatic or manual tuning operation.
Presetting
Stations
You can store up to:
15 FM stations
ENG
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER button.
Main Unit
2 | Tune in to the |
desired station. |
AutomaticTuning1 Press the STOP ( 
) button
to select PRESET and then
press TUNING 
or 
button to select the preset station.
AutomaticTuning2 Press the STOP ( 
) button to select "AUTO" and then press
TUNING 
or 
button to automatically search the band.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly press
TUNING 
or 
to tune in to a lower or higher frequency.
Press the Tuner
1button and select the FM band.
MHz
kHz
Press | TUNING |
| Press the TUNER |
or | to select |
| |
2 "89.10". | 3 | MEMORY button. | |
| |||
•Refer to Step 2 on page 43 to automatically or manually tune in to a station.
MHz | MHz |
| |
kHz | kHz |
1Press the TUNER button to select the FM band.
2
4
or 
to select preset number.Press TUNING
•You can select between 1 and 15.
5 |
| Press the TUNER | 6 | To preset another |
| station, repeat | |||
| MEMORY button. | |||
| steps 2 to 5. | |||
|
|
•If you can’t press “TUNER MEMORY” in 5 seconds, the preset disappears and “FM” displays.
RADIO OPERATION
MHz | MHz |
| |
kHz | kHz |
Press
(This applies only when listening to an FM station.)
| • |
|
| Each time the button is pressed, the sound switches between "STEREO" and "MONO". |
|
43 | • In a poor reception area, select MONO for a clear, | 44 |
|