

Connecting the FM Antennas
Setting the Clock
For
each step, you have a few seconds to set the required options.
If
you exceed this time, you must start again.
Switch the system on |
| Press TIMER/CLOCK | |
by pressing POWER |
| ||
| twice. | ||
1button. | 2 | ||
|
• "CLOCK" is displayed.
ENG
CONNECTIONS
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Note | • This unit does not receive AM broadcasts. |
3 Press ENTER. The hour flashes.
•Increase the hours :
•Decrease the hours :
5 |
| When the correct |
| time is displayed, | |
| press ENTER. | |
|
|
|
•"TIMER" appears in the display.
•The current time is now set.
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes :
•Decrease the minutes :
Note | • You can display the time, even when you are using another function, |
| by pressing TIMER/CLOCK once. |
•You can also use on the main set instead of
buttons in step 3,4.
13 | 14 |