CD Ripping Function, Timer Function | Samsung MAX-DG54R/XER instruction

CD RIPPING Function

You can rip a compact disc as a MP3 file on the USB

This feature enables you to ripping with the start of the disc or track of your choice.

Timer Function	ENG
•
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.

1Switch the system

Connect the

Load a compact

Example: You wish to wake up to music every morning.

on by pressing

POWER.

Press CD

4 RIPPING button on remote control to starting ripping.

¡¡If the system is playing state, turn the CD RIPPING dial down or press CD RIPPING button on the remote control to start the ripping for the current track.

¡¡Turn CD RIPPING dial up or press and hold CD RIPPING button on the remote control to start ripping the all tracks of Disc.

¡¡Press this button, “TRACK RIPPING” is displayed and CD RIPPING starts.

2 USB.

To stop ripping, press

5 STOP()button.and then automatically create and save as the MP3 file.

After CD-Ripping,a directory named “RIPPING FOLDER” will be created in your device.The file name is same with the disc.

3		disc(Digital
3		Audio).

Press the OPEN/CLOSE button to open the CD door.

Insert a CD and press the OPEN/CLOSE button to close the CD door.

Use the CD selection ( ) buttons to select the desired song.

	Switch the system		2		Press TIMER/
	Switch the system				CLOCK until
	on by pressing				TIMER is
1POWER.					displayed.

4	Set the timer	5		Set the timer
	Set the timer			Set the timer
	switch-on time.			switch-off time.

3 Press the ENTER button.

•ONTIME is displayed for a few seconds, followed by any switch- on time already set; you can set the timer switch-on time.

Press or button

6 to adjust the volume level and press

ENTER.

¡¡Press and hold this button, “FULL CD RIPPING” is displayed and CD RIPPING starts.

¡¡During CD ripping, do not disconnect USB device.

Note

a. Set the hour by pressing or button.

b. Press ENTER .

• The minutes flash.
c. Set the minutes by pressing	or

a. Set the hour by pressing or button.

b. Press ENTER.

• The minutes flash.
c. Set the minutes by pressing	or

•The source to be selected is displayed.

◆◆Don’t disconnected USB and AC Cord during CD-Ripping.This may cause the file damage.If you want to stop CD-Ripping during CD-Ripping,you must press stop Key first and after the CD Stopped,then you can remove the USB device.

◆◆If you disconnected USB device when CD Ripping, the main unit will be power off and you may not delete the ripped file, In this case, please connect the USB on the PC and backup the USB data on the PC first and then formate the USB device .

button.
d. Press	ENTER.
OFFTIME is displayed for a few
•
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.

button.
d. Press	ENTER.
VOL 10 is displayed, where 10
•
corresponds to the volume
already set.

◆◆When the USB memory is not enough, it will be displayed “RIPPING ERROR”.

◆◆DTS-CD can’t for CD Ripping.

◆◆With external HDD,FAT format the USB can be CD Ripping,but not NTFS. The CD Ripping function of this product does not support all USB devices.

◆◆When you use CD high speed search function or in the Pause or Stop mode, the CD Ripping can’t work.

◆◆During CD Ripping, do not deal impact.If is shocked while CD Ripping, CD Ripping maybe disengage.

◆◆Sometimes, some of USB devices, CD Ripping time is long. ◆◆In program mode, you can't use CD RIPPING function. ◆◆When CD Ripping completes or Stops, the CD will reload.

Press or	button		Press ENTER to	Press POWER to
to select the source to				set the system to
			confirm the timer.
be played when the		8		9 standby mode.	Tape
7 system switches on.
• TUNER (radio) : a Press ENTER.				• is displayed to the top right of	Deck
b Select	a preset station
by pressing or .				the time, indicating that the timer
• DVD/CD (compact disc) :				has been set.
Load on or more compact disc.				The system will switch on and off
• USB :Insert a USB.				•
				automatically at the required
• TAPE (cassette) : Insert a cassettetape.

times.

Note	•
	If the timer switch on and off times are identical, the word ERROR is displayed.
	•
	If there is no disc or usb, when you select the “DVD/CD, TAPE, USB, it will automatically change to
	“TUNER”.