Samsung NZ64H57477K/WT, NZ64H57479K/WT manual Safety Shutoff

Page 19

- error message, when the hob is overheated because of abnormal operation. (example : operation with empty cookware)

- message, cookware is unsuitable or too small or no cookware has been placed on the cooking zone.

Pause : Use this function to switch all cooking zones on to

the low power setting. (example : to take a telephone call) The display will show ‘’.

Complete Bridge zone selector : Use this function to expand cooking zone into complete left side.

Ready Pan : Use this function to preheat the pan.

SAFETY SHUTOFF

If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.

Any residual warmth will be indicated with , (for “hot”) in the digital displays corresponding to the particular cooking zones. The cooking zones switch themselves off at the following times.

Heat setting

Switch off

 

 

1-3

After 6 hours

 

 

4-6

After 5 hours

 

 

7-9

After 4 hours

 

 

10-15

After 1.5 hours

 

 

If the Hob is overheated because of abnormal operation, will be displayed. And the Hob will be switched off.

If cookware is unsuitable or too small or no cookware has been placed on the cooking zone, will be displayed. And after 1 minute the corresponding cooking zone will be switched off.

Should one or more of the cooking zones switch off before the indicated time has elapsed, see the section “Troubleshooting”.

04PARTS AND FEATURES

English - 19

NZ64H57479K_WT_DG68-00562A-01_EN.indd 19

2014-07-11 ￿￿ 10:58:23

Image 19
Contents Induction Hob Contents HOB USE Minor personal injury or property damage Using this manualImportant Safety Symbols and Precautions Severe personal injury or deathSafety instructions English English English Applicable in countries with separate collection systems Disposal instructionsSafety Instructions for the Installer Installing the hobConnecting to the Mains Power Supply 16A 2 x 1N ~ 32A 1N ~Installing Into the Countertop Min 520 480 English Cooking Zones Parts and features Control Panel Induction Heating ComponentsKEY Features of Your Appliance Safety Shutoff Temperature Detection Residual Heat IndicatorOther reasons why a cooking zone will switch itself off Cookware for Induction Cooking Zones Initial CleaningBefore you begin Hob useSize of Pans Suitability TestOperating Noises Energy saving tips Using Suitable CookwareLevel, touch the Heat setting selectors Using the Touch Control SensorsSwitching the Appliance on Select Cooking Zone and Heat SettingOn/Off control Switching the Appliance OFFSwitching a Cooking Zone OFF Using the Child Safety LockPress Timer control sensor TimerSwitching the child safety lock on / off Setting the safety shutoffEnglish Count up timer Using Ready PANSwitching the Ready Pan for Complete Bridge zone Switching the Ready Pan Front or Rear Bridge zone Power Boost ControlPause Power ManagementSound ON/OFF Bridge ControlSuggested Settings for Cooking Specific Foods HOB Cleaning and careLight Soiling Stubborn Soiling Problem DirtTo Avoid Damaging Your Appliance HOB Frame OptionFaqs and Troubleshooting Warranty and serviceWhat should I do if the display is illuminated? Is it a technical fault? ServiceTechnical Data Technical dataООО «Са Э Р К а» Саа а Таа
Related manuals
Manual 160 pages 20.89 Kb