3. Use the Timer setting selectors (
or 
) to set the desired amount of time, for example, 15 minutes, after which the cooking zone will automatically switch itself off. The safety shutoff is now activated.
4. To cancel the timer settings, select the target burner and hold down the Timer control 
sensor for 3 seconds. This will cancel the burner’s timer settings with a beep.
If holding down the Timer control 
sensor for 3 seconds without selecting a burner, this will cancel the timer settings of the last changed burner.
To display the time remaining for any of the cooking zones, use the Timer control 
sensor.
The corresponding control indicator will begin to blink slowly. The settings are reset using the Timer setting selectors (
or 
). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.
If you tap the Timer control 
sensor without selecting a cooking zone, the display turns on but no timer settings is applied.
To change the settings quicker, touch and hold any of the 
or 
control sensors until the desired value is reached.
English - 27
05BEFORE YOU BEGIN & HOB USE