Solving Common Problems

ENGLISH

Before contacting the after-sales service, perform the following simple checks.

They may save you the time and expense of an unnecessary call.

Problem	Explanation/Solution

The air conditioner does not operate at all

◆Check that the breaker used for the air conditioner is switched on.

◆Check that the operation indicator on the indoor unit is on;

if necessary press the (On/Off) button on the remote control.

◆Check whether the TIMER indicator on the indoor unit is switched on. If so:

-Wait until the switch-on time is reached and the air conditioner starts up automatically

-Cancel the timer (see pages 18 and 19 for further details)

The air conditioner does not operate with the remote control

◆Check that there are no obstacles between you and the indoor unit.

◆Check the remote control batteries.

◆Check that you are close enough to the indoor unit (seven meters/yards or less).

No beep is heard when you press		◆ Check that you are pointing the remote control at the remote control
the	(On/Off) on the remote	sensor in the right of the indoor unit.
control		◆ Replace the remote control batteries if necessary.

The air conditioner does not cool or heat

◆Check that the correct operating mode has been selected (AUTO, COOL, HEAT).

◆The room temperature may be too low or too high.

◆Dust may be blocking the air filter guard; refer to page 24 for cleaning instructions.

◆Check that there is no obstacle in front of the outdoor unit.

When heating, the required room temperature is never reached and the air conditioner frequently stops

◆Check that the required temperature has been set correctly.

◆Increase the fan speed.

◆If the air flow is directed upwards, use the remote control to direct it downwards.

The fan speed does not change		◆ Check that the operating mode is set to COOL, HEAT or FAN ; in the
when you press the	button	AUTO mode, the fan speed changes automatically and in the
		DRY mode, it is set to AUTO.
The air flow direction does		◆ Check that the air conditioner has been switched on; if necessary,
not change when you press the		press the	(On/Off) button on the remote control.
button
The timer is not correctly triggered		◆ Check that the timer has been programmed correctly; see pages 18
		and 19.
Odour is permeated in the room		◆ Air the room.
during air conditioning

E-23