Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 0.5 hour to 24 hours.
1To set the operating time, press the 
button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive.
2Press the 
button to complete the setting.
Result: The remaining time is displayed. Blinking of the timer indicator stops.
The selected mode and the temperature on the display disappear after 10 seconds.
The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On Timer setting.
3To select an operating mode in advance, press the 
button until the desired mode is displayed at the top of the remote control.
Result: | The air conditioner will run in the selected mode when it is |
| turned on. |
Note | If you don’t operate the remote control after setting the On Timer, |
| it will be turned off automatically after 25 hours. |
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can cancel it at any time.
1To cancel the On Timer, press the 
button one or more times until the timer setting disappears.
2Press the 
button.
Note | If you want to turn on the air conditioner before the timer reaches |
button.