Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote control. In the Auto mode, the cooling and heating operation is selected automatically. You can also raise or lower the temperature and the fan speed in the Auto mode.
1 If necessary, press the 
button.
Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected
when the unit was last used. The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started
immediately after being: Plugged in Stopped
lt will start up normally after three minutes.
2If the 
press the appears.
Result:
is not displayed at the top of the remote control,
button on the remote control one or more times until it
The indoor unit beeps each time you press the 
button. The air conditioner runs in the Auto mode.
The Auto mode cools and heats the room in optimum condition by adjusting the indoor temperature depending on the set temperature.
The mode may change from cooling into heating, from heating into cooling depending on the current temperature during operation.
Note You can change modes at any time.
3To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: | Each time you press the | button: |