Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 0.5 hour to 24 hours.
1 To set the operating time, press the 
button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive.
2 Press the 
button to complete the setting.
Result: | The remaining time is displayed. |
| Blinking of the timer indicator on the remocon stops. |
| The selected mode and the temperature on the remocon display |
| disappear after 10 seconds. |
| The air conditioner will switch on automatically when the |
| counter displayed on the remote control reaches the set time |
| and disappears the On Timer setting. |
3 To select an operating mode in advance, press the 
button until the desired mode is displayed at the top of the remote control.
Result: | The air conditioner will run in the selected mode when it is |
| turned on. |
|
|
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can cancel it at any time.
1To cancel the On Timer, press the 
button one or more times until
the timer setting disappears.
2 Press the 
button.
Note | If you want to turn on the air conditioner before the timer reaches |
the setting time, press the 
button.