Setup
Audio
Speaker Setting
DPL llz
•Off : Select when you place the Surround Back speakers as shown.
•On : Provide a more realistic 3D surround sound with vertical surround system.
Settings | Speaker Setting |
|
| ||
|
|
| |||
Display | DPL IIz | : | ◄ Off | ||
Audio | Level |
|
|
| |
System | Distance |
|
|
| |
Network |
|
|
| ||
Test tone | : | Off | |||
Language | |||||
|
|
|
| ||
Security |
|
|
|
| |
General |
|
|
|
| |
Support | <Change | rReturn | |||
|
|
|
|
| |
✎NOTE
When selecting DPLII Mode, you can listen to 7.1 channel sound from 2CH, 5.1CH audio. With 7.1 channel audio, you can listen to 7.1 channel sound as it is.
Level
You can adjust the balance and level for each speaker.
Adjusting Front/Centre/Surround /Surround Back/Subwoofer Speaker Level
•The volume level can be adjusted in steps from +6dB to
•The sound gets louder as you move closer to +6dB and quieter as you get closer to
Settings | Level |
|
|
| |
|
|
|
| ||
Display | Front L | : | ◄ 0 dB | ||
Audio | Front R | : | 0 dB | ||
Center | : | 0 dB | |||
System | |||||
Surround L | : | 0 dB | |||
Network | Surround R | : | 0 dB | ||
Surround Back L : | 0 dB | ||||
Language | |||||
Surround Back R : | 0 dB | ||||
Security | Subwoofer | : | 0 dB | ||
General | Test Tone | : | Off | ||
|
|
|
| ||
Support | <Change | rReturn | |||
|
|
|
|
| |
Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround, surround back and subwoofer speakers.
•You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).
Settings |
| Distance |
|
|
|
|
|
|
|
| |
Display |
| Front L | : ◄ 10ft (3.0m) | ||
Audio |
| Front R | : | 10ft (3.0m) | |
| Center | : | 10ft (3.0m) | ||
System |
| Surround L | : | 10ft (3.0m) | |
Network |
| Surround R | : | 10ft (3.0m) | |
| Surround Back L : | 10ft (3.0m) | |||
Language |
| ||||
| Surround Back R : | 10ft (3.0m) | |||
Security |
| Subwoofer | : | 10ft (3.0m) | |
General |
| Test Tone | : | Off | |
|
|
|
|
| |
Support |
| <Change | rReturn | ||
|
|
|
|
|
|
|
|
|
|
|
|
Test Tone
Use the Test Tone feature to check the speaker connections.
Press the ◄, ► buttons to select All.
•A test tone will be sent to Front Left
Centre Front Right Surround Right
Surround Back L | Surround Back R |
Surround Left | Subwoofer in order so you can |
make sure the speakers are set up correctly. | |
To stop the test tone, press the ◄, ► buttons to select Off.
Settings | Speaker Setting |
|
| |
|
|
| ||
Display | DPL IIz | : | Off | |
Audio | Level |
|
|
|
System | Distance |
|
|
|
Network | Test Tone | : ◄ | All | |
Language |
|
|
|
|
Security |
|
|
|
|
General |
|
|
|
|
Support | <Change | rReturn | ||
|
|
|
|
|
|
|
|
|
|
✎NOTE
When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is not available.