Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
•Automatic Tuning 1 : When the # $ button is pressed, a preset broadcast station is selected.
•Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to automatically search for active broadcasting stations.
•Manual Tuning : Press the TUNING/CH
(
) button to increase or decrease the frequency incrementally.
Using buttons on the product
1.Press the FUNCTION ( 
) button to select FM.
2.Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then press the
#$ button to select the preset station.
• Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then press and hold the # $ button to automatically search the band.
• Manual Tuning : Press the STOP ( ) button to select MANUAL and then press the # $ button to tune in to a lower or higher frequency.
|
| 04 |
Setting Mono/Stereo |
| Basic |
sound switches between STEREO | MO/ST | Functions |
Press the MO/ST button. | D |
|
• Each time the button is pressed, the |
| |
|
| |
and MONO. |
|
|
•In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 into memory
1.Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
) button to select <89.10>.
3. Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4.Press the # $ button to select 
preset number.
•You can select between 1 and 15 presets.
5.Press the TUNER MEMORY button again.
•Press the TUNER MEMORY button before NUMBER disappears from the display.
•NUMBER disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.
•To tune in to a preset station, press the # $ button on the remote control to select a channel.