Venting and Installation Clearances | Sierra Products EF5001U

Figure 1 -Overall Dimensions

OUTSIDE COMBUSTION AIR IS MANDATORY IN MOBILE OR MODULAR HOME INSTALLATIONS.

CAUTION: DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM .

VENTING AND INSTALLATION

CLEARANCES

CONTACT LOCAL BUILDING OFFICIALS ABOUT RE- STRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA.

A LISTED, 4" MINIMUM TYPE "L" PELLET VENT PIPE IS MANDATORY ON ALL INSTALLATIONS.

DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT, DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

Use only listed 4" minim um Type "L" pellet vent and com ponents for installation. The exhaust vent system

m ust be attached to the unit and to each adjoining section. All joints for connector pipe shall be fastened with at least three screws. If vented horizontally, joints shall be m ade gas-tight by sealing with high tem perature silicon or

m aterial specified by vent pipe manufacturer. Failure to use listed pellet vent pipe or install it per manufacturers instructions will void your warranty.

INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENT MANUFACTURER

Vent Pipes’ inner and outer diameters may vary. Check with vent pipe manufacturer for further details.

PELLET HEATERS REQUIRE A MINIMUM 5' VERTICAL RISE FOR PROPER OPERATION. ADDITIONAL RISE OF 2' FOR EVERY 1' HORIZONTAL BEYOND 1 ½'. MINIMUM DRAFT REQUIRED IS -.01 IN.WC. @

CONNECTION.

LOW DRAFT CONDITIONS RESULT IN OVERFEEDING AND POOR COMBUSTION.

Figure 2

WARNING: Installation of a Mobile Home Attachment Kit P/N 10412 and outside combustion air is mandatory in mobile or modular home installations although it may

also be used in all residential applications.

An outside air inlet MUST be provided for combustion

and ventilation air. The air inlet must rem ain unrestricted while unit is in use. Outside air connection is located in the rear of the heater (Figure 2). Use conduit pipe or metal flex pipe and/or fittings to make the air intake hook-up.

CAUTION: STRUCTURAL INTEGRITY OF THE MOBILE HOM E FLOOR, WALLS AND CEILING/ROOF MUST BE MAINTAINED.

1.W hen deciding on the location of your heater and vent pipe, try to minim ize the alteration and refram ing of structural com ponents of the building. Vent pipe must be installed so that access is provided for inspection and cleaning.

2.Avoid installing heater in high traffic areas. Keep children well away from the heater when in operation.

3.A 3" clearance to combustibles must be maintained for horizontal and vertical venting. W hen passing through ceilings or walls, you must use a listed wall thim ble, making sure all combustible materials and insulation products are a m inim um of 3" away from the pellet vent pipe.

4.A non-combustible hearth pad must be used if installed on a carpet, wood floor or other combusti- ble material (see Figure 3).

5.W hen installing the exhaust vent into an existing chim ney, a tee must be installed behind the heater before going up into the chim ney. This is necessary in order to rem ove fly ash accumulation.

6.Exit termination (distance to openings):

a.3 ft. minim um above any forced air inlet located within 10 ft.

b. 4 ft. minim um below and horizontally or 1 ft. minim um above any door, window or gravity air inlet into any building.

EF5001U specifications

The Sierra Products EF5001U is a versatile and powerful electronic appliance designed for both home and industrial use. Known for its robust construction and innovative features, this model stands out in its category, providing users with unmatched efficiency and reliability.

One of the main features of the EF5001U is its impressive power output. With a maximum performance of 5000 watts, this appliance is capable of handling a wide range of tasks, from powering tools to supporting multiple devices simultaneously. This makes it ideal for both professional contractors and DIY enthusiasts who demand high-performance equipment.

The EF5001U integrates advanced inverter technology, which helps to deliver a clean and stable power supply. This technology is crucial for sensitive electronic devices, ensuring they operate safely without the risk of voltage spikes or surges. Additionally, the inverter allows for more efficient fuel consumption, leading to longer operational times between refueling, making it a cost-effective choice for extended use.

Portability is another key characteristic of the Sierra Products EF5001U. This model features a lightweight design complemented by integrated handles, allowing for easy transport and convenient storage. Whether you need it for outdoor activities, road trips, or emergency backup power, its portability ensures that it can accompany you anywhere.

Safety features are also a priority with the EF5001U. It comes equipped with automatic shut-off mechanisms that activate in the event of low oil levels or overheating, protecting both the unit and its users. Furthermore, the durable construction and weather-resistant materials ensure that the EF5001U can withstand harsh conditions, making it a reliable choice for various environments.

User-friendly controls and indicators simplify operation, allowing even individuals with minimal technical experience to use the unit effectively. The intuitive interface provides clear information about operational status, making it easy for users to monitor performance at a glance.

In conclusion, the Sierra Products EF5001U is a top-of-the-line electronic appliance that combines power, efficiency, and portability. With its advanced inverter technology, robust safety features, and easy-to-use design, it is well-suited for a wide range of applications, making it an excellent investment for anyone in need of reliable power solutions. Whether at home or on the job, the EF5001U is engineered to meet and exceed expectations.