HI TEMP/FLUE RED Warning Light | Sierra Products EF5001U manual

under the control knob cam e on. This light is the Hi Tem p/Flue Indicator Light.

Solution: The Hi-Tem p/Flue Indicator light indicates that fly ash has built up in the exhaust system and/or there is a restriction in the exhaust/flue system . Check the pipe system for excessive ash and clogging, particularly the vent cap. Rem ove the clean out cap on the tee and make sure that ash has not blocked the exhaust air flow. This autom atic shut down in case of flue clogging is a safety feature and if the shut down occurs it m eans you have a problem and should consult a service technician and/or clean your pipe and heater thoroughly. If you feel the fly ash build up is excessive, we suggest that you try another brand. In m oist climates the pellets and fly ash can actually absorb moisture from the air and create creosote and a severe clogging problem . Keep this in mind when you store and handle your pellets. The heater warranty does not cover the quality of the fuels used or the way they may be handled either before or after you've purchased them .

7.Problem: I press a “Run” button and the heater did not start.

Solution: Check for AC power. The autolite system requires 110V AC power to operate. If heater only 12VDC battery power, follow manual light procedure. If AC power is available, clean burn pot for heavy ash deposit. Heavy ash deposits will act as insulator and not allow pellets to light. Check autolite fuse located on fuse panel to confirm fuse is not blown. Replace fuse with 5 am p if required.

8.Problem: I started to add pellet fuel and the heater went out.

Solution: The heater incorporates a safety switch that will disable the feed system when the hopper door is open. If fuel is to be added while heater is in operation it must be accomplished with in several

m inutes of opening the door.

9.Problem: I turned off the switch and the heater kept running.

Solution: This is norm al. The exhaust blower will keep running until it cools down and then it will autom atically turn off. This can vary by the tem pera- ture the exhaust has reached and the tem perature of the cooling air.

10.Problem: Feed system jam m ed.

Solution: This condition is caused by fuel contam inated with hard materials such as rocks or metal objects. To correct this rem ove all pellets from hopper. Unplug heater from any power source (12V & 110V). Rem ove the (4) nuts with a 3/8" nut driver attaching access cover. Carefully rem ove cover and vacuum out rem ain pellets. Locate the object jam m ing auger and reassemble. Plug heater into power source and push “Run” button. W ith hopper door open, press safety switch down and view auger operation. If auger turns freely add fuel. And prim e fuel system .

HI TEMP/FLUE RED WARNING LIGHT:

W hen the Hi-Tem p/Flue indicator light com es on (red lite beneath control knob) it m eans a fault has been detected in either the flue system , over tem perature, or fan/feed m otor.

Slow Flash Red Light - Indicates a blocked flue. Check flue and clean out for built up ash deposits.

Solid Red Light - Indicates an over tem perature. Check the air intake at rear of unit. Turn the feed trim down 25% to reduce fuel rate.

Fast Flash Red Light - Requires unit to be unplugged to reset. Indicates a feed m otor jam or fan motor fault. Fan

m otor test would require running unit on “fan and clean” only to determ ine if red light indication is repeated. If not, feed system is jam m ed and requires the hopper access cover to be rem oved and jam m ed material to be rem oved. If this condition continuos contact your dealer for service.

TRIM KNOB ADJUSTMENT:

Underneath the control knob you will find a small round knob that will turn forward and reverse. This knob can control the feed m otor rate. By turning the knob clockwise you can increase the burn rate and by turning it counterclockwise you can decrease the burn rate. Use this to change the overall rate for different pellets. For instance, if the pellet has high ash and burns dirty decrease the "trim " and if the heater goes out on low or has low flam e increase the "trim ".

Move this KNOB carefully! It is designed to fine tune your LOW setting in the event you change brands of pellets and/or live at a higher elevation.

Customer Service & Replacement Parts

Replacement parts are available from your local dealer or on-line @www.sierraproductsinc.net . Our call or write:

Custom er Service Sierra Products, Inc.

5061 Brooks St., Ste. B, Montclair, CA 91763 Phone 1-909-399-3355 x21

Fax 1-909-399-3357

www.sierraproductsinc.net

Figure 19 Feed system access through hopper

EF5001U specifications

The Sierra Products EF5001U is a versatile and powerful electronic appliance designed for both home and industrial use. Known for its robust construction and innovative features, this model stands out in its category, providing users with unmatched efficiency and reliability.

One of the main features of the EF5001U is its impressive power output. With a maximum performance of 5000 watts, this appliance is capable of handling a wide range of tasks, from powering tools to supporting multiple devices simultaneously. This makes it ideal for both professional contractors and DIY enthusiasts who demand high-performance equipment.

The EF5001U integrates advanced inverter technology, which helps to deliver a clean and stable power supply. This technology is crucial for sensitive electronic devices, ensuring they operate safely without the risk of voltage spikes or surges. Additionally, the inverter allows for more efficient fuel consumption, leading to longer operational times between refueling, making it a cost-effective choice for extended use.

Portability is another key characteristic of the Sierra Products EF5001U. This model features a lightweight design complemented by integrated handles, allowing for easy transport and convenient storage. Whether you need it for outdoor activities, road trips, or emergency backup power, its portability ensures that it can accompany you anywhere.

Safety features are also a priority with the EF5001U. It comes equipped with automatic shut-off mechanisms that activate in the event of low oil levels or overheating, protecting both the unit and its users. Furthermore, the durable construction and weather-resistant materials ensure that the EF5001U can withstand harsh conditions, making it a reliable choice for various environments.

User-friendly controls and indicators simplify operation, allowing even individuals with minimal technical experience to use the unit effectively. The intuitive interface provides clear information about operational status, making it easy for users to monitor performance at a glance.

In conclusion, the Sierra Products EF5001U is a top-of-the-line electronic appliance that combines power, efficiency, and portability. With its advanced inverter technology, robust safety features, and easy-to-use design, it is well-suited for a wide range of applications, making it an excellent investment for anyone in need of reliable power solutions. Whether at home or on the job, the EF5001U is engineered to meet and exceed expectations.