Precautions for use

Important Safety Instructions

This equipment must not be used in an area where combustible material are stored. Never operate or store gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

PRECAUTIONS

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precaution, including the following:

•Be sure the electrical power source is adequate for the model. This information can be found on the rating label which is located on the back of the unit.

•Be sure the air conditioner has been securely and correctly installed according to the installation instructions provided with this manual. Save this manual for possible future use in removing, storing or reinstalling this unit.

•When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.

•Avoid air inlet and outlet grills from being covered or closed off.

•Never insert your fingers or any foreign objects into the air outlet. Take special care to warn children of these dangers.

•Use the unit in rooms of a suitable size and always remember that areas of high heat gain such as conservatories and sun lounges require up to four times the cooling power of conventional rooms.

•Close the fireplace damper floor and wall registers to avoid cool air escape up the chimney and into the duct work.

•Clean the air filter as recommended in the section "Care and Cleaning".

ELECTRICAL INFORMATION

The complete electrical rating of your new room air conditioner is stated on the nameplate. Refer to the rating when checking the electrical requirements.

•Be sure the air conditioner is properly grounded. To minimize shock and fire hazard, proper grounding is important.

•LCDI (Leakage Current Detection Interrupters) are built into the power cord cap of our room air conditioners.

•If the power cord is damaged and the power conductors touch the shield, the LCDI will interrupt power if even a small amount of current leaks to the shield. In such case, it must be replaced by the manufacturer, service agent or a similarly qualified electrician to avoid hazard.

•Your air conditioner must be plugged into proper power outlet. If the power outlet you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, please contact qualified electrician to install the proper power outlet.

•Do not use an extension cord or an adapter plug.

•Be sure the maximum amps of all devices on that fuse or circuit breaker can not exceed the amps of the fuse or circuit breaker.

ARP-9009TL, ARP-9011TL specifications

The Royal Sovereign ARP-9011TL and ARP-9009TL are advanced roll laminators designed to meet the needs of commercial printing businesses and in-house print departments. Both models are engineered for high performance, efficiency, and versatility, making them excellent choices for a range of applications, including signs, graphics, and photographs.

One of the standout features of the ARP-9011TL is its professional-grade laminating capability, which includes the ability to handle materials up to 11 inches wide. This model is equipped with a dual roller system that delivers smooth lamination and even heat distribution, ensuring high-quality results every time. The temperature control settings are user-friendly, allowing operators to adjust the heat according to the specific requirements of different materials, thus accommodating a wide range of substrates.

The ARP-9009TL, while slightly smaller, boasts similar capabilities and is designed for tasks like mounting and laminating that require a high degree of precision. This unit can handle media up to 9 inches wide, making it suitable for projects that require careful attention to detail and high-quality finish. Both models are built with a sturdy construction that ensures durability and stability during operation, minimizing the risk of jams or errors.

What sets these laminators apart is their advanced technology. Both models come with a digital display that enables users to easily monitor the temperature and speed settings. The automatic reversing feature is a significant advantage, allowing for quick adjustments if a material misfeeds. This not only saves time but also reduces waste, improving the overall efficiency of the laminating process.

Safety is also a priority with the Royal Sovereign ARP-9011TL and ARP-9009TL. Each model includes built-in safety features, such as a safety shut-off function that activates when the machines are idle for a preset duration. This proactive design element enhances user safety and promotes energy efficiency.

Overall, the Royal Sovereign ARP-9011TL and ARP-9009TL are multifunctional laminating machines that cater to various laminating needs, marrying technology with user-friendly operation. With their professional capabilities and focus on quality, these models stand out as valuable tools in any modern printing facility.