Safety Notice

EF4001B AutoLite Pellet Stove Insert

Installation & Operating Instructions

Please read this entire manual before installation. Save these instructions.

<CAUTION: HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.

<IF THIS HEATER IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT.

<CONTACT LOCAL BU ILDING OFFICIALS ABOUT RE- STRICTIONS AND INSTALLATION INSPECTION REQUIRE- MENTS IN YOUR AREA.

<FAILURE TO COMPLY WITH OWNERS' MANUAL IN- STRUCTIONS WILL VOID YOUR WARRA NTY!

NOTE: This heater should not be installed in a bedroom or bathroom.

PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET FUEL-BURNING ROOM HEATER. FAILURE TO FOLLOW T HESE IN STRUCTION S COU LD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.

GENERAL INFORMATION

Installation and repair should be done by a qualified service person. The heater should be inspected before use and at least annually by a professional service person. More frequent cleaning may be re quired due to fuel quality, excessive lint from carpeting, bedding m aterial, etc . It is impera tive that control com partm ents, burn pot and circulat- ing air passageways of the heater be kept clean.

The EASYFIRE Pellet Insert has been designed and approved for burning wood pellet fuel only. Burning solid fuel in other forms is not permitted and will void all warran- ties.

This unit has been approved for use with a Ø 3" Type L Pellet Vent System or Stainless Chimney Liner (Ø 4" on runs 10 feet and above).

NEVER use gasoline, gasoline-type lantern fuels, kerosene, charcoal lighter fluid, or similar liquids to start or "freshen up" a fire. Keep all such liquids well away from the heater while it is in use.

Ashes must be disposed of in a metal container with a tight fitting lid and placed on a noncombustible floor or ground, well away from all fuels, pending final disposal.

NOTE : During the first few burns the high tem perature paint and sealant used in manufacture will emit some odor and smoke. Open doors and windows to the outside for proper ventilation during the first burn cycle and curing of the paint.

This heater, when installed, m ust be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70-

2006.

INSTALLER: PLEASE LEAVE THIS MANUAL WITH THE OWNER!!

	Sierra Products, Inc.
	5061 Brooks St., Ste B	Listed by OMNI-Test
	Montclair, CA 91763	Listed by OMNI-Test
	Montclair, CA 91763	Laboratories, Inc.
	(909) 399-3355	Report No. 256-S-01-4

EF-4001B specifications

The Sierra Products EF-4001B is an advanced electronic device that has gained recognition for its innovative features and exceptional performance. Designed to cater to a variety of users, from professionals to enthusiasts, this product seamlessly combines technology with functionality.

One of the primary features of the EF-4001B is its robust build quality. The device is constructed from high-grade materials, ensuring durability and longevity. This resilience makes it an excellent choice for individuals who require a reliable tool in demanding environments.

In terms of performance, the EF-4001B is equipped with a powerful processing unit that delivers rapid responses and efficient operation. The device operates with advanced algorithms that optimize its functionality, allowing users to experience unparalleled speed and accuracy. This characteristic is especially beneficial for users in fast-paced industries where timely results are crucial.

The EF-4001B also incorporates cutting-edge connectivity options. With support for both wired and wireless connections, users can easily integrate the device into various setups, whether in an office, workshop, or home environment. This versatility in connectivity enhances user experience, facilitating seamless communication and data transfer.

Another noteworthy feature is its user-friendly interface. The EF-4001B is designed with an intuitive control panel, ensuring that users can navigate its functionalities effortlessly. This aspect is particularly important as it allows individuals of all skill levels to utilize the device effectively without a steep learning curve.

The Sierra Products EF-4001B also boasts enhanced energy efficiency. Engineers have implemented advanced power management technologies that minimize energy consumption without sacrificing performance. This eco-friendly aspect not only reduces operational costs but also contributes to environmental sustainability.

Furthermore, the device's safety features are commendable. With built-in protection mechanisms, the EF-4001B ensures safe operation under various conditions. This makes it a reliable choice for users who prioritize safety alongside performance.

In summary, the Sierra Products EF-4001B is a versatile and reliable electronic device that excels in durability, performance, connectivity, user-friendliness, energy efficiency, and safety. Its combination of advanced technologies and thoughtful design makes it an outstanding option for anyone looking to enhance productivity and streamline operations in their respective fields. Whether in a professional or personal setting, the EF-4001B stands out as a leading choice that meets the demands of today’s users.