Maintenance Procedure

Note: Caution must be taken when installing burn pot or operating door not to damage ceramic glass. Do not attempt to operate heater if glass becomes dam aged in any w ay!

2.Control Functions: Control functions on the Eas yfire

are as follows: OFF, FAN, LOW , MEDIUM, HIGH, CLEAN. Here is how each function works:

A.W hen the Control is set to FAN , a timer is activated and you will have about ten (10) minutes to get the pellets lit and rea ch a minimum tem pera ture.

Should the pellets not light in the 10 minutes simply turn the knob to OFF and begin again. This will give you another 10 minutes to get the pellets lit. The reason for the tim er fun ction is so that the heater will autom atically shut down if the fire goes out. Pellets do not feed in the FAN position.

B. In the LOW position, the EASYFIRE will be feeding approximately 1 to 1½ lbs. of pellets per hour and the flam e will fluctuate between 1" and 6" in height.

C. In the MEDIUM position the EASYFIRE will be feeding approximately three (3) pounds of pellets per hour and the flame will fluctuate between 3" and 8" of fire.

D. In the HIGH position the EASYFIRE will be feeding approxim ately 4 lbs. per hour and the flam e will fluctuate between 3" and a full flame. The fan speed will increase accordingly as the heater au tom atically adjusts itself based on temperature inside the heater (see G below).

E.The CLEAN position is to be used only when the heater is not burning and you wish to clean out the accumulated ash in the front of the fire area. See CLEAN OUT section of maintenance instructions.

F. After the heater is running for several hours and you wish to turn it off simply turn the knob to OFF. The

heater will continue running until it cools down and then will automatically shut itself down.

G. REMEMBER: Each feed position will fluctuate because the m icroprocessor is autom atically adjusting the fee d and air based on tem perature. T his m eans the pellet feed ra te and flam e height will change accordingly based on quality of pellet and heat loss of dwelling.

CAUTION: Moving parts may cause injury, DO NOT operate with rear cover removed.

WARNING: Risk of electrical shock, disconnect all power before servicing.

ALWAYS TURN YOUR Heater OFF & LET IT COOL BEFORE CLEANING.

Your EASYFIRE Pellet Heater requires routine

m aintenance for m aximum perform ance and is ma ndatory for the warranty to re m ain in effect.

The following procedures should be studied carefully and performed regularly as indicated:

1.Fly-ash:Some ash will accumulate in the heat exchanger, Fire Pot and flue and should be cleaned out on a regular basis for bes t efficiency and safety. W hen the heater is shut down and cold, you should:

a.Open door and remove Heat Exchanger Cover. To rem ove, sim ply slide up and out from retaining angle brac ket (Figure 12). Clean one side at a tim e. W ith one slide cover rem oved, leave door open and turn control knob to the "CLEAN" position. Let heater run

Figure 14

until ash in Fire Pot area is vacuumed out by heater fan. Turn off and replace cover. Rem ove remaining cover and repeat procedure for the other side. The vent pipe should be cleaned out after this procedure. Rem ove the clean-out port cover (Figure 13) and vacuum as required.

b. Rem ove Fire Pot by lifting up and out, it may be brushed out or vacuumed. Fire Pot should be cleaned daily. Make sure holes in pot are not clogged . The are a around and below the pot should be checked every five or six days depending on how many hours a day you are burning your heater and the quality of the pellets being burned. (After a few days you will be able to determine the frequency needed for clean out.)

The important thing to rem em ber is that excessive Fly- ash accumulation will affect the efficiency of the burn.

c.Scrape pellet feed chute with putty knife to rem ove hardened material on which sawdust can accumulate.

EF-4001B specifications

The Sierra Products EF-4001B is an advanced electronic device that has gained recognition for its innovative features and exceptional performance. Designed to cater to a variety of users, from professionals to enthusiasts, this product seamlessly combines technology with functionality.

One of the primary features of the EF-4001B is its robust build quality. The device is constructed from high-grade materials, ensuring durability and longevity. This resilience makes it an excellent choice for individuals who require a reliable tool in demanding environments.

In terms of performance, the EF-4001B is equipped with a powerful processing unit that delivers rapid responses and efficient operation. The device operates with advanced algorithms that optimize its functionality, allowing users to experience unparalleled speed and accuracy. This characteristic is especially beneficial for users in fast-paced industries where timely results are crucial.

The EF-4001B also incorporates cutting-edge connectivity options. With support for both wired and wireless connections, users can easily integrate the device into various setups, whether in an office, workshop, or home environment. This versatility in connectivity enhances user experience, facilitating seamless communication and data transfer.

Another noteworthy feature is its user-friendly interface. The EF-4001B is designed with an intuitive control panel, ensuring that users can navigate its functionalities effortlessly. This aspect is particularly important as it allows individuals of all skill levels to utilize the device effectively without a steep learning curve.

The Sierra Products EF-4001B also boasts enhanced energy efficiency. Engineers have implemented advanced power management technologies that minimize energy consumption without sacrificing performance. This eco-friendly aspect not only reduces operational costs but also contributes to environmental sustainability.

Furthermore, the device's safety features are commendable. With built-in protection mechanisms, the EF-4001B ensures safe operation under various conditions. This makes it a reliable choice for users who prioritize safety alongside performance.

In summary, the Sierra Products EF-4001B is a versatile and reliable electronic device that excels in durability, performance, connectivity, user-friendliness, energy efficiency, and safety. Its combination of advanced technologies and thoughtful design makes it an outstanding option for anyone looking to enhance productivity and streamline operations in their respective fields. Whether in a professional or personal setting, the EF-4001B stands out as a leading choice that meets the demands of today’s users.