Nissan R50 manual Removing the Automatic Transmission

Page 9
In order for the fluid change pipe to clear the engine completely remove the automatic
transmission.
5. Remove the oil cooler lines from the transmission and plug all open transmission holes.
6. Remove transfer control linkage on the driver side rear of the transmission. (4wd models only)
7. Remove front (4wd only) and rear driveshaft.
8. Remove the transmission control cable.
9. Remove the passenger side exhaust heat shields.
10. Disconnect the wiring harnesses from the transmission located at the rear passenger side.
11. Remove the starter wires and then the starter.
12. Remove both engine gussets
13. Remove the lower splash shield.
14. Remove the bolts securing the torque converter to drive plate.
Access the torque converter bolts through the starter hole. (see illustration)
Fig 1.2 Torque converter bolts through starter hole.
15. Remove remaining bell housing bolts.
9

Removing the Automatic Transmission

Before starting this procedure drain the automatic transmission fluid and transfer case fluid (4wd models). It’s important to dispose of all fluids at an authorized recycling center.

1.Remove the negative battery cable.

2.Remove the crankshaft position sensor. It is located on the top driver’s side of the bell housing.

3.Remove exhaust tubes from the catalytic converters all the way back.

4.Unbolt and remove the fluid change pipe from the engine and transmission.

Image 9
Contents Page Page Table of Contents Illustration list Overview Tools Required Part Description for clutch activation Parts ListAutomatic Transmission Automatic transmission and Wiring HarnessRemoving the Automatic Transmission Page Removing the Interior Panels Electrical Electronic Control Module ReplacementPage Some 97 models Ascd and Park Neutral Switch ConversionClutch Clutch Dampener Installing the Clutch activation systemBlind hole puller tool Clutch InstallationPilot bearing installed in crankshaft Manual Transmission FS5R30A and TX-10 AssemblyLarge plug Manual transmission wiringBell housing sealant instructions Installing the Manual TransmissionInterior Reinstallation Illustrations List Motor Mount ConversionAutomatic Transmission

R50 specifications

The Nissan R50, also known as the Nissan Pathfinder in many markets, represents a significant evolution in the world of mid-sized SUVs. Produced from 1995 to 2004, the R50 was designed to combine the rugged capabilities of an off-road vehicle with the comfort and practicality required for everyday use.

One of the primary features of the R50 is its body-on-frame construction, which enhances durability while providing better off-road capabilities compared to many of its unibody competitors. This robust design is complemented by a fully independent suspension system, allowing for better handling and ride comfort, especially on uneven terrain. The R50 can accommodate five passengers, with ample cargo space that makes it a favored choice for families and outdoor enthusiasts alike.

Under the hood, the R50 offers a selection of engines that cater to both performance and efficiency. The standard 3.3-liter V6 engine delivers a balance of power and fuel economy, generating around 168 horsepower. For those seeking a more robust driving experience, some variants also featured a 3.5-liter V6 engine that produced up to 250 horsepower. The R50 typically came equipped with a four-speed automatic transmission, although a five-speed manual was available on certain models, allowing for a customizable driving experience.

Technologically, the R50 was ahead of its time, offering features that enhanced both safety and convenience. Available all-wheel-drive systems improved traction and control in various driving conditions, making it suitable for both urban and off-road adventures. Optional features included advanced audio systems, power windows and locks, and other amenities that catered to driver and passenger comfort.

Safety was also a focus, with the R50 equipped with dual front airbags and anti-lock braking systems (ABS) in many models. These features contributed to its solid safety ratings during its production years.

As a versatile SUV, the R50 combines style, comfort, and capability. With its blend of ruggedness and modern features, the Nissan R50 continues to be a beloved choice among SUV enthusiasts, embodying Nissan's commitment to quality and innovation in the automotive industry. Whether tackling rough trails or cruising on city streets, the R50 remains a testament to Nissan's engineering excellence.