NewAir AC-14100E, AC-14100H owner manual Additional Notes

Page 10

Additional Notes:

1.To prolong the life of the compressor, after turning off the unit, please wait at least 3 minutes before turning the unit back on.

2.The cooling function will turn off if the ambient temperature is lower than the set temperature. However, the fan speed will still continue to operate at the set speed. If the ambient temperature rises above the selected temperature, cooling will resume.

3.The heating function will turn off if the ambient temperature is higher than the set temperature. However, the fan speed will continue to operate at the set speed. If the ambient temperature drops below the selected temperature, heating will resume.

4.This machine is equipped with an anti-frost function. When using the heating function in low temperatures, the heater may stop momentarily in order to melt any frost that has accumulated. If this occurs, simply wait for the heating function to resume.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents NewAir AC-14100E / AC-14100H PLEASE READ AND SAVE THESE INSTRUCTIONSPage Back PARTS LISTAccessories Front1. Using the window kit INSTALLATION INSTRUCTIONSInstalling the Exhaust Hose and Window Kit 2.Using the adapterFIG.12 Positioning the Exhaust HoseFIG.11 FIG.13Page Control Panel OPERATING INSTRUCTIONSTurning the Unit On and Off Setting the Fan/Ventilation Speed Setting the Mode/FunctionSetting the Temperature Setting the TimerEnergy Efficiency Boosting Function Ionizer Function OptionalSelf-DiagnosisFunction PLEASE NOTEAdditional Notes DRAINING THE UNIT Page Page TROUBLESHOOTING
Top Page Image Contents