NewAir AC-10000H, AC-10000E owner manual Regulating the Air Flow Direction, Please Note

Page 10

Regulating the Air Flow Direction

To control the air flow direction, adjust the knob on the louvers.

FIG. 16

PLEASE NOTE:

1.To prolong the life of the compressor, after turning off the unit, please wait at least 3 minutes before turning it back on.

2.The cooling system will switch off if the ambient temperature is lower than the set temperature (the ventilation will keep working at the set level). If the ambient temperature rises above the selected level, cooling will resume.

Image 10

Contents NewAir AC-10000E, AC-10000H PLEASE READ AND SAVE THESE INSTRUCTIONSGENERAL SAFETY INSTRUCTIONS BEFORE USEELECTRICAL SAFETY Frequently clean the filters FOR MAXIMUM EFFICENCYBack PARTS LISTFront AccessoriesINSTALLATION INSTRUCTIONS Installing the Exhaust HosePositioning the Exhaust Hose 1.Remove the filter frame from the unit Installing the Activated Carbon Filter4.Reattach the filter frame onto the unit OPERATING INSTRUCTIONS Control PanelSetting the Timer Setting the TemperatureSetting the Fan/Ventilation Speed Heating Mode only for model no. AC-10000HRegulating the Air Flow Direction PLEASE NOTEDRAINING THE UNIT For Continuous DrainagePLEASE NOTE For Heating Mode only for model no. AC-10000HCleaning the Filters MAINTENANCE INSTRUCTIONSCleaning the Housing PLEAE NOTETROUBLESHOOTING TECHNICAL SPECIFICATIONS ADDITIONAL REMARKSWarranty Exclusions LIMITED MANUFACTURER’S WARRANTYWarranty Terms Obtaining Service