HOW TO USE
| - Before operating the product, connect the power plug to a dedicated |
Tips | electric outlet. |
- Once the power is turned on, you will see the previously used operation mode, | |
| already set for you to use. |
■To operate the manual mode
Press the power button and then select the speed of the wind by pressing the speed button.
■To select the auto mode
Press the power button and then select the auto mode button.
▶ Auto mode
▶
▶
Auto operating mode sets the wind speeds (step 1, 2, or 3) depending on the air pollution states that are detected by the pollution sensor.
When the pollution levels stay in step 1 for approximately 10 minutes, the product switches to power saving mode.
In the power saving mode, the fan is turned off to minimize the power consumption and all displays except the power and auto indicators are turned off.
When the pollution level increases to level 2 or higher, the power saving mode is turned off. When the power saving mode continues for 30 minutes, the product temporarily switches from the power saving mode to step 1 to blend the surrounding air.
| Pollution level 1 | Pollution level 2 | Pollution level 3 or higher | Power saving mode |
SPEED | Step 1 | Step 2 | Step 3 | Fan off |
13