NewAir AP-1008DH warranty Cleaning Method, Cleaning the pre-filter every 2 ~ 4 weeks

Page 18

CLEANING METHOD

		- Always unplug the product before cleaning the filter.
		- The pre-filter is reusable by removing dust or cleaning it with water.
	Tips	- If the pre-filter is not cleaned for a long time, the product performance may deteriorate.
	Tips	- The HEPA filter are not reusable with cleaning. Never clean them with water.

	■ Cleaning the pre-filter (every 2 ~ 4 weeks)

1. Open the front cover by pulling out the end part above the air inlet.

2. Take out the pre-filter by pulling out on the handles.

∗ To prevent dust from falling off, remove the filter carefully without exerting a shock.

3.Clean the pre-filer with a vacuum cleaner or with water depending on the level of contamination.

4. Install the pre-filter after removing the moisture completely. Fit the front cover back to the product.

∗ When refitting the pre-filter to the product, fit it in the hook correctly.

Image 18

Contents Coway Air Purifier AP-1008DH Power saving mode FeaturesPollution level indicator/ mood lamp Mcctm medium filterContents Dear CustomersSafety Information Electricity SafetyInstallation Safety Do not install the product on a sloped floorOr combustible materials are used or stored Operation Safety Outlet Unplug the product before you clean itProduct or using benzene or Thinner Objects stuck in the upper part of the productParts Name Speed indicator Pollution sensor unitPower cord HandleAIR Purified Process Pre-filter Mcctm medium filter Deodorization filterOpen the front cover PreparationsPlease Check Before Use Open the front cover by pulling the upper part of itIndication Part Speed indicatorOperation / Indication Part Light sensorOperation Part CleanBlue Lightly polluted Polluted Highly Light purple Dark purpleTo select the auto mode HOW to USETo operate the manual mode Press the power button and then select the auto mode buttonTo operate the silent mode Sensitive Standard Insensitive Adjust Particle SensorHow to Adjust the Sensitivity of the Pollution Sensor Speed stepCleaning the air inlet and outlet every 2 months Cleaning the front coverCleaning the product body every 2 ~ 4 weeks Cleaning Method Cleaning the pre-filter every 2 ~ 4 weeksFilter cleaning and replacement cycles Filter ReplacementHow to replace filters Filter replacement indicatorSwitches to power saving mode, turning TroubleshootingSymptom Check Measures to take Off the fan automaticallySpecification Product specification Air PurifierAP-1008BH/CH/DH Add Woongjin Coway USA, INC Call Center 213 386-9900 / 213 FAX 213001

CLEANING METHOD

Tips

■ Cleaning the pre-filter (every 2 ~ 4 weeks)