Samsung SSA-P102T/EXP manual Input Connection

Input Connection

Door Contact

Exit Button

PUSH

GND

INPUT #5

GND

INPUT #4

GND

INPUT #3

GND

INPUT #2

GND

INPUT #1

INSTALLATION AND EXTERNAL CONNECTION

-The Input #1 and Input #2 ports have the Exit button and the Door Contact Sensor installed, while Input #3 to Input #5 can be configured to your preference.

-Exit Button Connection

Connect one line of the Exit button to IN 1.

Connect the other line of the Exit button to GND.

- Door Contact Sensor Connection

Connect one line of the Door Contact Sensor to IN 2.

Connect the other line of the Door Contact Sensor to GND.

- Auxiliary Device Connection (AUX #3, AUX #4, AUX #5)

Connect one line of the auxiliary input device to any one of IN3, IN 4, and IN 5.

Connect the other end of the auxiliary input device to GND.

- 2.2kΩ Resistor Connection for Short-Circuit Check

1.To enable the short-circuit check function, you must have connected a 2.2KΩ resistor between the input line (ex: orange) and the ground line (GND). First, specify if you check each input device for any short circuit.

2.Using the input port/DIP switch test, you can check if the short-circuit resistor is properly connected.

Input Line (ex: orange)

PUSH

2.2KΩ Resistor

Input Device

GND

English _ 13