CAUTION: DISCONNECT THE CLEANER FROM THE OUTLET BEFORE PERFORMING THE OPERATIONS BELOW
REPLACING THE DUST BAG
1)Push the release button on the dust cover as shown, and pull it forward.
2)Grip the handle of the dust bag and pull out.
3)Close dust bag tab to avoid dust leakage and put it away.
4)Install the new dust bag by placing the hole over the exhaust port and pressing it into place as shown.
5)Replace the dust cover by inserting the tab into the body slot then push the top of the cover into place.
NOTE: If the dust bag is not installed correctly, the dust cover will not close.
We recommend the use of genuine Miele paper bags only; Part # 05294 741 Type Z
FILTER CARE
Fig. 1
In addition to the dust bag, the vacuum cleaner contains two filters; a central filter that protects the motor (Fig.1) and a HEPA Filter, that removes particles from the exhausted air (Fig. 2).
The HEPA Filter should be changed every six months or whenever it becomes dirty. The central filter should be changed or rinsed out whenever the HEPA Filter is replaced.
IMPORTANT: Do not forget to
Fig. 2
CENTRAL FILTER (Fig. 1)
Part # F03M1000
To remove, slide the central filter forward out of this housing.
IMPORTANT: If the central filter has been rinsed out, make sure it is dry before
HEPA FILTER (Fig. 2)
Part # S02Z6000
To change the HEPA Filter, simply remove the exhaust cover as shown and replace the filter.
– 8 –