Milwaukee 2260-21 manual Manual Range and Auto Range

Page 21

Table 5. Menu Choices for Target Materials and their

Corresponding Emissivity Ratios

Material in

Corresponding

Emissivity Menu

Emissivity Ratio

ALUMINUM

0.30

ASPHALT

0.95

BRICK

0.83

CONCRETE

0.95

COPPER

0.60

IRON

0.70

OIL (PETROLEUM)

0.94

PAINT

0.93

RUBBER

0.95

SAND

0.90

SOIL

0.92

STEEL

0.80

WATER

0.93

WOOD

0.94

Manual Range and Auto Range

When you turn on the Thermal Imager, it is always in AUTO RANGE mode. This means that it automatically selects the lowest temperature and highest temperature in its range to make thermal images. Usually, this produces the best results. However, if you want to use a narrower or wider temperature range, you can select MANUAL RANGE.

Typical reasons for selecting MANUAL RANGE:

•An area in the field of view that you want to focus on has a narrow range of temperatures, and you want to be able to resolve these small differences. For this, you would set a narrower MANUAL range than AUTO RANGE.

•There is one extremely hot point in the field of view, and you want to make sure that it gets measured. For this, you would set a wider MANUAL range than AUTO RANGE.

•There are both very cold and very hot objects in the field of view, and you want to make sure to measure both temperature extremes. For this, you would set a wider MANUAL range than AUTO RANGE.

M12 160x120 Thermal Imager Operator's Manual

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents OPERATOR’S Manual Contents Safety Information M12 160x120 Thermal Imager Operator’s Manual Thermal Imager and a Thermal Image IntroductionHow to Use the Manuals Obtaining Technical Support or Service Identifying Items in the Hard Case Unpacking the SystemIdentifying Items in the Hard Case Model or Part Number Accessing the SD Memory Card Charging and Installing the BatteryLocating the Controls and Features Controls and FeaturesName Function Controls and FeaturesSymbology 876 Battery Fuel Gauge Levels and Imminent Shutdown Warning Battery Life and Power-Saving FeaturesTaking a Basic Thermal Picture Setting Time138.9˚F Live Visual Camera View Using the Built-In Visual Image CameraOptimizing Thermal Images Reviewing Saved ImagesEmissivity Material Corresponding Emissivity Menu Emissivity Ratio Manual Range and Auto RangeAuto Manual IRON, Rainbow and Gray Color Palette Choices Changing the Color PaletteSettings Menu Changing the SettingsPhysical and Environmental SpecificationsVisual Imaging Glossary Color palette, palette CelsiusDetector Detector, InfraredFixed focus Focusing ringFPA focal-plane ArrayInfrared detector Infrared IRIP rating Jpeg .jpgTemperature Object temperatureMenu MicrobolometerSleep mode ResolutionSaved image ScaleTarget Storage temperatureThermal Imager Thermal imager lensTrigger ToggleType a USB Visual imageM12 160x120 Thermal Imager Operators Manual Sawdust USA Milwaukee Service

2260-21 specifications

The Milwaukee 2260-21 is a state-of-the-art infrared thermometer designed primarily for industrial applications. This tool is integral for professionals who require precision in temperature measurements without direct contact with the surface being measured.

One of the standout features of the Milwaukee 2260-21 is its infrared capabilities, which allow users to measure temperatures ranging from -18°F to 1,112°F. This wide temperature range makes it incredibly versatile for various applications, including electrical diagnostics, HVAC maintenance, and automotive servicing. With its laser targeting system, users can pinpoint target areas accurately, enhancing measurement precision.

Another remarkable aspect is Milwaukee's True RMS technology. This ensures that the thermometer delivers accurate readings even in the presence of variable or distorted signals, a feature that professionals in the electrical field deeply appreciate. The device is equipped with a dual laser that not only aids in aiming but also offers a visual representation of the area being measured, making it easier to evaluate possible hot spots on surfaces.

The Milwaukee 2260-21 also boasts a backlit display, enabling visibility in low-light conditions. This feature is essential for professionals who often work in dimly lit environments, ensuring that temperature readings are clear and easily readable. Additionally, the display includes multiple measurement modes, allowing users to switch between Fahrenheit and Celsius according to their preferences.

Ease of use is another characteristic that sets the Milwaukee 2260-21 apart. The simple interface includes a one-handed operation feature, making it facile for technicians to take readings while performing other tasks. The device is also built with durability in mind, featuring a rugged housing that can withstand the rigors of job site conditions.

In terms of battery life, the Milwaukee 2260-21 offers exceptional performance, allowing users to rely on the thermometer throughout the day without frequent changes. The tool also comes with a remanufactured battery system, reducing environmental impact while ensuring maximum efficiency.

Overall, the Milwaukee 2260-21 infrared thermometer is a blend of advanced technology, rugged design, and user-friendly features. Whether it’s for troubleshooting electrical problems, optimizing HVAC systems, or conducting routine maintenance checks, this tool is an invaluable asset for any professional looking to enhance their efficiency and accuracy in temperature measurement. Its reliability, precision, and user-oriented design make it a top choice in the industry.
Top Page Image Contents