Changing the Color Palette
The default color palette is called “IRON.” IRON, RAINBOW and GREY are all shown in Figure 14. IRON is the default. It is better at revealing small temperature differences.
| 99.0˚F |
|
| 110.0˚F |
|
| 101.2˚F |
|
IRON | RAINBOW | GRAY | IRON | RAINBOW | GRAY | IRON | RAINBOW | GRAY |
71 |
| 111 | 69 |
| 111 | 71 |
| 111 |
Figure 14. IRON, RAINBOW and GRAY Color Palette Choices
You can change to two other color palettes: “RAINBOW” and “GRAY.” GRAY shows the most detail and is useful for record keeping or reporting in formats that do not allow the use of color. RAINBOW is an alternative to IRON, which uses more colors. RAINBOW is better for show a very wide range of temperatures because of the additional colors. To change the color palette, proceed as follows:
1.From the live view mode, press 
then 
if needed to select COLOR, then 
. This opens the menu bar shown in Figure 14. Press the 
and 
arrow buttons to make your selection, then press 
to confirm it.
M12 160x120 Thermal Imager Operator's Manual | 21 |