Procom SN250TYLA-D, SL250TYLA-D Installing Logs, Operating Heater, Lighting Instructions

Page 9

INSTALLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams may result in property dam- age or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no flame comes in contact with any log. With the heater set to HIGH, check to see if flames contact any log. If so, reposition logs according to the log installation instructions in this manual. Flames contacting logs will create soot.

IMPORTANT: Make sure log does not cover any burner ports (see Figure10).

Figure 10 -Installing One-Piece Log Set (Top View)

OPERATING HEATER

￿FOR YOUR SAFETY ￿

READ BEFORE

LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing prop- erty damage, personal injury or loss of life.

A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

*Do not try to light any appliance.

*Do not touch any electrical switch.

*Do not use any phone in your building.

*Immediately call your gas supier from a neighbor’s phone. Follow the gas supplier’s instructions.

*If you cannot reach your gas supplier, call the fire department.

C. Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don;t try to repair it; call a qualified service technician. Force or attempted repair may result in a fire or explosion.

INSTALLATION

Continued

D. Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety informatuion above.

2.Set thermostat (gas control knob) to lowest setting.

3.Turn off all electric power to the appliance (if applicable).

4.Push in gas control knob slightly and turn clockwise to “OFF”. Do not force.

5.Waitten (10) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above. If you don’t smell gas, go to the next step.

6.Find pilot-the pilot is attached at the bottom of the burner assembly.

7.Turn gas control knob counterclockwise to “PILOT”.

8.Push in gas control knob all the way and hold in. Repeatedly push the pieze ignitor button until pilot is lit (or use a match to light pilot). Continue to hold the control knob in for about one (1) minute after the pilot is lit. Pilot should remain lit. If it goes out, repeat steps 4 through 8.

*If knob does not pop up when released, stop and immediantely call your service technician or gas supplier.

*If pilot will not stay lit after several tries, turn the gas control knob to “OFF” and call your service technician or gas supplier.

9.Attention! Gas control has an interlock latching device. When the pilot is intially lit and the safety magnet is energized (pilot stays “ON”) the INTERLOCK latching device becomes operative. If the gas control is turned to the “OFF” position or gas flow to the appliance is shut off, the pilot cannot be relighted until the safety magnet is de- energized (approximately 60 seconds). There will be an audile “click” when the safety magnet in the gas control is de-energized. Pilot can now be relighted. Repeat steps 4 through 8.

10.Turn gas control knob counterclockwise to “HI”.

11.Turn on all electric power to appliance (if applicable).

12.Set thermostat (gas control knob) to desired setting from “HI” to “LO”.

9

Figure 11 -Control Knob and

Ignitor Button location

Figure 12 -Pilot

NOTICE: During initial operation of new heater, burning logs will give off

apaper-burning smell. An orange flame will also be present. Open a window to vent the smell. This will only last a few hours.

CAUTION: Do not try to adjust heating levels by using the equipment shutoff valve.

TO TURN OFF GAS TO APPLIANCE

1.Set thermostat (gas control knob) to lowest setting.

2.Turn off all electric power to appliance if service is to be performed (if applicale).

3.Push in gas control knob slightly and turn clockwise to “OFF”. Do not force.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SN250TYLA-D SL250TYLA-D OWNER’S Operation and Installation ManualP O R TA N T R e a d Safety Information WarningsProduct Features Safety InformationLocal Codes UnpackingProviding Adequate Ventilation AIR for Combustion and VentilationVentilation Air From Outdoors Check GAS Type InstallationConnecting to GAS Supply InstallationChecking GAS Connections Pressure Testing Heater Gas ConnectionsFor Your Safety Read Before Lighting Installing LogsOperating Heater Lighting InstructionsOperating Heater Manual Lighting ProcedureThermostat Control Operation Inspecting BurnersCleaning and Maintenance Observed Problem TroubleshootingPossible Cause RemedyObserved Problem Possible Cause SpecificationsSL250TYLA-D SN250TYLA-D RemedyReplacement Parts Accessories Replacement PartsParts Under Warranty Equipment Shutoff ValveInstall legs and flex tube Illustrated Parts Breakdown PA RT S C RIP Tion QTY Numb E R Parts ListIllustrated Parts Breakdown Part Description QTY Number SN250TYLA-D SL250TYLA-D C E S S O R Y M O D E L NFHTX186 Installing Blower Accessory Blower Accessory Model NFHTX186Side View Installing Blower Accessory Blower Accessory Model NFHTX186

SL250TYLA-D, SN250TYLA-D specifications

The Procom SL250TYLA-D and SN250TYLA-D are advanced communication solutions designed for professional users who demand reliable and efficient performance in challenging environments. Both models combine cutting-edge technology with robust features, making them ideal for various applications, including public safety, event management, and business communication.

The SL250TYLA-D is particularly known for its standout audio clarity, which ensures that users can communicate seamlessly even in noisy conditions. It boasts a powerful speaker that provides crisp and clear sound, allowing users to stay connected without needing to raise their voice. This robust audio system also incorporates noise-cancellation technology, which filters out unwanted background sounds, enhancing the clarity of communication.

The device features a user-friendly interface, with a large LCD display that provides essential information at a glance. Users can easily navigate through menus and settings, making adjustments on the go. The durable design of the SL250TYLA-D ensures it can withstand the rigors of daily use, with an IP67 rating that makes it resistant to dust and capable of withstanding immersion in water. This durability is complemented by an extended battery life, allowing for all-day use without the need for frequent recharging.

On the other hand, the SN250TYLA-D is specifically designed for versatile communication. It supports multiple frequency bands, allowing it to be used in various communication scenarios, whether in urban settings or remote areas. The device is equipped with digital encryption features, ensuring secure communications that protect sensitive information from eavesdropping or interception.

In terms of connectivity, both models support Bluetooth functionality, allowing users to connect to headsets and other devices, enhancing hands-free communication. They also feature a variety of programmable buttons that can be customized to suit the user's needs, enabling quick access to frequently used functions.

Another significant characteristic of the SL250TYLA-D and SN250TYLA-D is their compatibility with other Procom accessories, such as external antennas and chargers, allowing for a customizable communication setup. These models are designed for ease of use, making them an excellent choice for teams that need reliable and immediate communication in dynamic environments.

Overall, the Procom SL250TYLA-D and SN250TYLA-D stand out for their exceptional audio quality, durable design, advanced security features, and user-friendly interfaces. They represent a solid investment for organizations that prioritize effective communication and operational efficiency in their daily operations.
Top Page Image Contents