Napco Security Technologies GEM-P400 manual Glossary

Page 14

Glossary

Ambush Code - In the event that you are forced by an intruder to disarm your system, this special code can be used to disarm the system, and simultaneously send a silent alarm to Central Station. If your system has the Ambush feature enabled, the code assigned as the User 4 code will function as your Ambush Code.

Arming / Disarming - Turning the system on or off by entering your user

code at the keypad, followed by￿.

Auto Interior Bypass - A feature which allows the system to recognize when you have not left the premises and automati- cally bypass any interior zones, deacti- vating devices such as motion sensors, allowing free movement throughout the premises.

Battery - A backup source of power to provide protection for a limited time in the event of a power failure.

Bypass - the manual or automatic re- moval of one or more protection zones from the system. Press￿and then

14the zone number to bypass a zone.

Central Station - Monitors alarm, emergency and trouble reports from the alarm system and notifies proper authori- ties.

Chime - a keypad beep which indicates that a door has been opened while the system is disarmed.

Easy Exit - Allows an occupant to leave the premises without disarming the sys- tem. Pressing ￿and then ￿

while the system is armed will permit exit by removing the protection on the Exit/ Entry door for 3 minutes.

Exit/Entry Delay - The amount of time you are allowed to enter and leave the premises when the system is armed.

Exit/Entry Zone - A zone which will allow you to enter and leave the premises when the system is armed.

Instant Protection - Arming without En- try Delay while remaining on the premises. (Press ￿while armed)

Keypad Sounder - A local warning de- vice at the keypad to alert that Entry delay has started,

System Trouble - A problem has been detected in the system which may pre- vent it from working properly.

TROUBLE will be lit to indicate a sys-

tem trouble.

User Code - A four digit code which is used to arm and disarm the system from the keypad.

User 1 Code - A four digit code which can be used to program, re-program and erase user codes, as well as arm and disarm the system from the keypad.

Zone - An area which is protected by a security device. Your front door may be designated as Zone 1, while the living room motion detector may be Zone 2. Refer to the Zone Label on your keypad for the Zone Identification of your sys- tem.

Oi230a

Tuesday, September 16, 1997 08:26

page 14

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 20387 Oi230a Introduction Important Test Your System Weekly Keypad Controls and Indicators I NEasy Arm Arming Your System When LeavingArming Your System Bypassing ZonesEasy Exit optional Instant ModeProtecting Yourself While at Home Arming with a System Trouble Present Trouble is litEmergency Buttons Ambush AlarmEmergency Conditions Alarm Indication Disarming Your System / Silencing an AlarmDisarming Your System when Returning Silencing an AlarmEasy Arm when system is disarmed Special FunctionsMode if there are no more troubles to view System TroublesOr dispose of in fire Entering the User Program Mode Programming User CodesGlossary Oi230a Napco Limited Warranty

GEM-P400 specifications

Napco Security Technologies GEM-P400 is a state-of-the-art security control panel designed for residential and commercial applications. This robust system offers a comprehensive suite of features that enhance security and streamline system management.

One of the standout features of the GEM-P400 is its ability to support a wide range of security devices. It can integrate seamlessly with various sensors, alarms, and cameras, providing users with flexibility and scalability in their security solutions. With the capacity to manage up to 40 zones, the GEM-P400 ensures that every aspect of a property is covered, from doors and windows to motion detectors.

The GEM-P400 utilizes advanced communication technologies, including IP and cellular connectivity. This dual-path communication method ensures that users receive real-time alerts and notifications, even during a power outage or if the phone line is cut. This redundancy is crucial for maintaining security and peace of mind.

Another notable characteristic of the GEM-P400 is its user-friendly interface. The panel is equipped with an intuitive keypad that allows for easy navigation and operation. Users can quickly arm or disarm the system, adjust settings, and check system status with minimal hassle. Furthermore, the system supports remote access via mobile apps, enabling users to monitor their security setup from anywhere in the world.

The GEM-P400 also offers programmable functions, providing customization options to fit various user needs. This includes the ability to configure specific alarm settings, schedules, and access levels for different users. Such flexibility ensures that whether it’s a family home or a business, the security setup can be tailored to meet specific requirements.

Additionally, Napco Security Technologies emphasizes the importance of reliable performance. The GEM-P400 is built with durability and longevity in mind. It incorporates advanced hardware that ensures stable operation, reducing the likelihood of malfunctions and improving overall reliability.

In summary, the GEM-P400 from Napco Security Technologies distinguishes itself as a feature-rich, flexible, and robust security panel. Its integration capabilities, dual-path communication, user-friendly interface, and advanced programmability make it an excellent choice for both residential and commercial security needs. With its commitment to quality and performance, Napco Security Technologies continues to be a trusted name in the security technology industry.
Top Page Image Contents