Napco Security Technologies GEM-P400 manual Arming Your System When Leaving, Easy Arm

Page 6

Arming Your System

Arming Your System When Leaving

1 Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding Zone number will be lit. Secure these zones before proceeding. If any zones cannot be secured, see Bypassing zones below.

2 Enter your user code and press￿. The green Status light will go out, the red Armed light will light.

∙If you make a mistake entering your code, press ￿, re-enter the code and press￿.

3 Leave the premises through the Exit/Entry door. If the keypad gives a steady tone you have taken too long. Enter your code again to disarm system and then re-enter code and leave.

Easy Arm

The optional Easy Arm feature allows the system to be armed by simply pressing￿.

This will allow the easy arming of the system by someone who is not a regular system user.

Bypassing Zones

If an open zone cannot be immediately fixed it can be left unprotected, or bypassed ,while the rest of the system is Armed. To bypass a zone:

1 Press￿followed by the number of the zone to be bypassed. The bypassed zone’s number will flash slowly.

2 Enter your user code and press￿. The green Status light will go out and the red Armed light will light.

3 Leave the premises through the Exit/Entry door.

When the system is subsequently disarmed, all bypassed zones will be reset, ready to be armed again. If it is necessary to bypass any inoperative zone(s), it is important to have the zone(s) repaired as soon as possible.

A bypassed zone does not provide any protection, compromising system security.

6

Oi230a

Tuesday, September 16, 1997 08:26

page 6

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 20387 Oi230a Introduction Important Test Your System Weekly Keypad Controls and Indicators I NEasy Arm Arming Your System When LeavingArming Your System Bypassing ZonesEasy Exit optional Instant ModeProtecting Yourself While at Home Arming with a System Trouble Present Trouble is litAmbush Alarm Emergency ConditionsEmergency Buttons Alarm Indication Disarming Your System / Silencing an AlarmDisarming Your System when Returning Silencing an AlarmEasy Arm when system is disarmed Special FunctionsMode if there are no more troubles to view System TroublesOr dispose of in fire Entering the User Program Mode Programming User CodesGlossary Oi230a Napco Limited Warranty

GEM-P400 specifications

Napco Security Technologies GEM-P400 is a state-of-the-art security control panel designed for residential and commercial applications. This robust system offers a comprehensive suite of features that enhance security and streamline system management.

One of the standout features of the GEM-P400 is its ability to support a wide range of security devices. It can integrate seamlessly with various sensors, alarms, and cameras, providing users with flexibility and scalability in their security solutions. With the capacity to manage up to 40 zones, the GEM-P400 ensures that every aspect of a property is covered, from doors and windows to motion detectors.

The GEM-P400 utilizes advanced communication technologies, including IP and cellular connectivity. This dual-path communication method ensures that users receive real-time alerts and notifications, even during a power outage or if the phone line is cut. This redundancy is crucial for maintaining security and peace of mind.

Another notable characteristic of the GEM-P400 is its user-friendly interface. The panel is equipped with an intuitive keypad that allows for easy navigation and operation. Users can quickly arm or disarm the system, adjust settings, and check system status with minimal hassle. Furthermore, the system supports remote access via mobile apps, enabling users to monitor their security setup from anywhere in the world.

The GEM-P400 also offers programmable functions, providing customization options to fit various user needs. This includes the ability to configure specific alarm settings, schedules, and access levels for different users. Such flexibility ensures that whether it’s a family home or a business, the security setup can be tailored to meet specific requirements.

Additionally, Napco Security Technologies emphasizes the importance of reliable performance. The GEM-P400 is built with durability and longevity in mind. It incorporates advanced hardware that ensures stable operation, reducing the likelihood of malfunctions and improving overall reliability.

In summary, the GEM-P400 from Napco Security Technologies distinguishes itself as a feature-rich, flexible, and robust security panel. Its integration capabilities, dual-path communication, user-friendly interface, and advanced programmability make it an excellent choice for both residential and commercial security needs. With its commitment to quality and performance, Napco Security Technologies continues to be a trusted name in the security technology industry.
Top Page Image Contents